Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

help - heavy-duty inset hinges?

11/8/15       
david zaret Member

i'm building a custom kitchen, all inset face frame. the client wants the pantry to have storage on the back of the doors - 4" or so for cans/jars and such. that will yield 100lb+ doors....

blum tells me that their euro hardware will handle 7.5lbs per hinge, and they have no option for anything more.

I've studied SOSS, tectus, and a few others, but all are for thicker doors. does anyone have a recommendation on how i handle this situation?

thanks in advance for any guidance.

--- dz


View higher quality, full size image (1350 X 1532)

11/8/15       #2: help - heavy-duty inset hinges? ...
perley bowen

Use a piano hinge.

11/8/15       #3: help - heavy-duty inset hinges? ...
david zaret Member

for obvious reasons, i'm trying to avoid using exposed hardware. the kitchen is solid walnut, inset, raised panel... i think the knuckle of the piano hinge would be pretty ugly. any other ideas?

11/9/15       #4: help - heavy-duty inset hinges? ...
Chris

Sugatsune just came out with a new heavy duty concealed hinge. It's big with no soft close. Dampeners would work though. You're probably have to pack out the insides for mounting it...don't think it comes in a face frame version. Also, pivot hinges would work.

Sugatsune heavy door cup honge

11/9/15       #5: help - heavy-duty inset hinges? ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

This is a very common application. The solution most often used is to simply add a sufficient number of hinges to meet the estimated weight of the door with a full storage rack attached.

I don’t see the height of the doors on your drawing but would guess they are approximately 48” tall (Unless they extend to the floor). The doors with empty racks would be about 25-30lbs. These are fairly small pantry doors (about 18 X 48). I would wonder, could you even fit 60lbs of cans on a door this small? Standard or soft close Salice hinges are rated for 2 hinges/20lb door, 3 hinges/40lb door, 4hinges/60lb door.

If you want added security, you could use 5 hinges. Place 2 close together near the top, 2 close together near the bottom and one in the center of the door.

I would try to avoid using the inset hinge and plate combination where the mounting plate attaches to the back of the face frame. You will get far more stability by attaching the mounting plate directly to the cabinet side. Below is a reference guide illustrating the correct hinge and plate combination to use when mounting to the cabinet side while considering the reveal that is behind the face frame.

I hope I'm reading your drawing correctly.

Best of luck


View higher quality, full size image (1213 X 522)


View higher quality, full size image (1270 X 1661)

11/9/15       #6: help - heavy-duty inset hinges? ...
david zaret Member

this is helpful, thanks. do you think that salice is a better choice than blum? i always saw them as relatively equivalent...

--- dz

11/9/15       #7: help - heavy-duty inset hinges? ...
Bob Harkleroad

I think Dennis likes Salice! ;^)

11/9/15       #8: help - heavy-duty inset hinges? ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Well David, since Salice sends me a paycheck every month I have to say Salice is better. (I've been the Salice regional sales manger, Midwest for 21 years.)

I will also give due credit to the "other orange" company for making a very fine product. :)

11/9/15       #9: help - heavy-duty inset hinges? ...
david zaret Member

aha! well, alright then, i'll give them a try. i'm in the midwest, so perhaps you cover my region. richelieu in detroit is where i'll get the stuff.... unless you suggest elsewhere. thanks for everyone's assistance.

--- dz

11/9/15       #10: help - heavy-duty inset hinges? ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Richelieu, Sterling Heights should have everything you need.

Thanks!

11/9/15       #11: help - heavy-duty inset hinges? ...
Larry

Salice makes good stuff, We use their institutional hinges in our commercial work. Good hinges but for people that can't stand to see hinge knuckles not applicable. For light duty we use Blum clip hinges. Don't like face frame mounting plates.

11/9/15       #12: help - heavy-duty inset hinges? ...
david zaret Member

sounds great. i build my cabinets so that the inside of the face frame is flush with the inside of the box, so i don't have to worry about mounting the plates to the face frames or blocking out the box. i'll try these hinges and report back.

again, thanks for the help.

11/19/15       #13: help - heavy-duty inset hinges? ...
Cabmaker Member

I would take a more cautious approach. 100 lbs is a lot of weight for any hinge with an arm, especially given that it's an inset application. When I do inset I have a 3/32 margin around my doors, so think about this- if the door sags 3/64 you've lost half your margin and it will be obvious, and I'm sure you'll get a call from the customer if it's a high end kitchen. I have learned in the past that just because a client wants something, if it doesn't make sense or isn't structurally sound, you should discuss it with the client. If the client insists, make sure you price in the time it takes to properly engineer this. I would mock this up 1st with as many hinges as you deem necessary making sure you have the maximum weight on the mocked up door that you are representing and see if there is any sag. Your obligation is to offer a guaranteed result and anything less will only get you into trouble.

11/19/15       #14: help - heavy-duty inset hinges? ...
Cabmaker Member

One more thing to add. Remember these doors have to stand the test of time. Otherwise again, you will have problems. Any metal fatigue due to the weight will eventually cause a problem. If the Salice rep is willing to offer you a guaranteed result (and take care of any future service issues) then you're good to go.

11/19/15       #15: help - heavy-duty inset hinges? ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Cabmaker,

I would agree 100% with a trial mockup. This is always a wise and prudent activity, particularly if the application is unique or testing the limits of the specifications. After all, it is your name and reputation on the line and your customer is trusting you to make the appropriate choices of hardware.

Any Salice product installed within the stated specifications is subject to a lifetime warranty set forth by the company in1989. If any doubt remains to the suitability of the product for the application, the Salice engineering team is always available for detailed consultation.


View higher quality, full size image (564 X 164)

12/10/18       #16: help - heavy-duty inset hinges? ...
Jim

Website: https://www.sugatsune.com

Sugatsune does have heavy-duty inset euro cup hinges, but yes, they'd have to be blocked out for the face frame. Believe it or not, face frame cabinetry is pretty much a North American thing.

The J95 hinges are fairly robust and can hold up to 88 lbs using 3 hinges. They come in free-swinging and self-closing types. There is currently no option for a soft close.

Looking at David's image, a lot of that upper shelf space appears to be above 5'6" ~ 6'. If you need to lower the weight, would it work for the client to eliminate the top 1-2 shelves? I find that they're not used as often as they're out of reach anyway, and you worry less about someone dropping a 2-lb can/jar of pasta sauce on their head.

https://www.sugatsune.com/products/productdetails.cfm?catid=5&subcatid=10&productid=J95-24/0T,J95-C24/0T


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)