|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
biesse rover 15, boring block spindle motor is connect to yaskawa driver?3/22
I am not sure is yaskawa Z driver related to boring block motor or is it separate ?
my error mesages are motor overload, so i decided to remove the motor which i am glad, i found screw was loose at spindle head, gear dropped on the block and grinding the block so i cleaned up tight the screw back oiled installed back. When i turn the motor spindle by hand it is tighter and no tilting on the bearings, it was very smooth slightly movement before i tight it back, is that normal?
so i am waiting the driver from the repair shop few other parts. Is any of you have knowledge?
There is no relation to your Z yaskawa drive and the drill block nor the router inverter.
"found motor RC filter was crack". Not sure what you are referring to here. Drill motor? Z motor?
BVC also rebuilds any Biesse drill heads.