|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Does anyone out there have an Andi Stratos O-MC CNC Router w/ tool change?5/30
Does anyone out there have an Andi Stratos O-MC CNC Router with tool changer?
I need the PMC Parameter codes so I can reload them into my machine.
The memory board battery went dead and so all the parameters were lost.
I already had a backup of the CNC Parameters, but didn’t realize I needed the PMC Parameters also.
I have an instruction sheet from FANUC on how to back them up if you haven’t already—that way you will also have a backup when needed.
Please email me at firstname.lastname@example.org.
Ok, I don't have an Anderson router, but they were my second choice when I bought mine. Why wouldn't Anderson America supply you with the needed file? With hard drive failures and other issues, I had either the back up files in my office, or the manufacturer gave me what I needed without cost.
My suggestion would be to get the original manual from John Stevens in our parts department. We have the hard copies here on our shelf, even for machines that age.
We'll have to take it down and get a copy made; but once you have the manuals, you'll have what you're requesting inside.