|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
1994 Author 502 software upgrade?5/26
Can this machine be upgraded to a modern operating software? It is a Tria 6000 I think. would like to modernize it. Like to use a zip drive to load programs instead of a FLOPPY DISK ,,,
There are companies that sell emulators that replace the floppy drive and allow use of a usb stick instead.
its not so simple with the emulator
We replaced our floppy with a usb drive on our tria 7500 controler. It works but I would not recomend as the USB is just emulating as floppy, you still have file size and qty limits.
My 502 just crashed . does anyone know where I can buy a new or used controller. I can replace it myself , just need the parts for a 1993 Author 502 morbidelli
I have a 504 spares machine, I am in Norway. What parts do you need. You can try to format Your hard drive if you have back up, if not you need to input all parameters manually, this is ususally on paper inside Your Control Box.
What crashed? Is it just the power supply or hard drive? I think both might be available from SCM.
I need a whole new controller. . I have a tria 6000 1993 model . Any suggestions