|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Source for 6mm PCD router bit5/13
How deep are you cutting? I'm using a 3/8" diameter, 2 flute PCD bit from Leuco with a slight downshear angle.
The cutting length is only about 1/2" though.
Thx Gary b
The letters are most times small < 50mm so a 6mm bit is the largest diameter I can go.
Mick- We offer a two flute PCD cutter in 1/4"CED x 1/2" CEL, if that would work for you. Part number 6730