|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Onsrud Auto Loader4/17
I know there're some Onsrud people on here. I have a trouble ticket open, but I figured I'd give this a shot as well.
Have a 145T12DA with an auto loader, and although we have suction and the cups are coming down, it simply will not pickup. It stops and the controller displays the attached error message.
Thanks in advance
Grab your electrical schematic and do some basic traces,
If there is no estop then let current pass to material sensor(switch), eye checks for material and then opens electro valve to start suction. (Grab a small flat head and manually reset the electro valve to the suction cups)
Hope this helps.
There is a pressure switch or sensor saying the dust collection is open and creating suction. Check out the sweeper arm for make sure when it is unloading, it knows the gate is open for the dust collection. There might be a pressure switch that let's it know there is suction.