|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Hey, lets open a Cabinet Pro discussion... any users out there? I'd like to hear some testimonies......
We have been using Cabinet Pro for probably 15 years. It has worked well for us and we have just recently purchased a cnc. No plans to change.
I have been using their CNC edition for approximately 2 years. For us it was our first CNC capable software. While we were shopping for our first CNC we were spending just as much time ensuring we choose the right software.
Been using CP for 15+ years. I started out before I had a CNC then upgraded to the CNC edition when I bought the machine. Like Steven says it took a while to get it set up but well worth the time. Frank is great about listening to suggestion to make it program better for all not just me, and he actually answers the phone when I call for help.
I'm a Cabinet Pro user of a little over a year now and am very happy with the software. It has a fairly steep learning curve but has been so worth the effort put into it as I'm getting fantastic results. I'm using the CNC edition of course and running it on a Biesse Rover 1224 FT. The big plus tho is Frank - he's honestly devoted to helping his clients get up and running so they can be productive and profitable as quickly as possible. And the software WORKS!!!!! You can go to their Facebook page to see some of my work all done in Cabinet Pro.