|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
SCM S15 B Questions4/6
I purchased a 2012 SCM S15B used with really low use on it. We are busy setting up for the SCM tech to set up the machine in early May. I am finding it difficult to gather information I need to give to Mozaik for my post and wondered if anyone here would be willing to help me out.
I am sure all of this can be tweaked when we integrate and test, but here are the details I need specifically as it relates to this machine. (it has the standard 7 position drill and a 10 position atc)
1. Gcode Output - inches or MM?
I have also been looking for some type of user manual for Xilog Plus. If someone has a PDF file of this and is willing to share that would also be very helpful.
Lastly, If any of you use this era machine and Mozaik together, I would like to know if you have also installed the CNC Operator at the machine. I know it isn't "needed", but it sure seems like not having the machine operator need help from the office for remakes, etc has it's advantages.
Thank you in advance!
1. Use what ever scale you use in your shop in or mm it doesnít not matter.
in scm like biesse like homag like tpa
Unless you are doing work that requires reference from the top of the material use spoilboard as zero and all Z references to match.
So, a 1/4 deep cut in to a 3/4 sheet of material should be at Z0.500.
Thank you for the responses guys. Much appreciated!