|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Biesse CNC profile program9/11
Hi does anyone know how to write a code on Biesse editor or does anyone know the method behind making a profile door pattern with an arched top. We can make an arched top profile but the arched top which automatically changes with different door widths is confusing us.
You need to program your arch so the reference points are not fixed but variables.
I hole this helps. Email me if you need more help.
Further to Jason's post:
If you want to control the variables based on door width you would insert instructions at the beginning of your program.
The vb instruction can be as complex as you need it to be but does need to cover all the possibilities you may want to throw in. You can't leave holes in the logic.
Thanks so much Jason & Dan. Great information that really helped.
Instructions go to the commands area.
Thanks heaps Dan. Getting info on these machines is hard to come by. Much appreciated.