Furniture Making

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Resin resources

11/24/19       
Brad Member

I'm jumping back into woodworking specifically to learn more about resin tables and similar projects. I'm searched all the woodworking forums that have come up on google but I haven't seen any forums specifically dedicated to resin topics. Is there something like this around, maybe sponsored by one of the resin suppliers that I haven't stumbled upon yet? I'd hate to keep bothering general woodworking forums with resin questions.

Also, earlier in my research I found a supplier that had a page of many of the tools you need when working with resin tables and one of those was a 3" 4 blade router bit that planed a surface. For the life of me I can't find that supplier's page again. Does this sound familiar to anyone? It's not Black Forest or Stone Coat Countertop. If not, would anyone have a good suggestion for a similar router bit? The one listed on that particular supplier's page was about $100.

11/24/19       #2: Resin resources ...
Tom Gardiner

The bit in question is known as a spoilboard surfacing bit. All the major industrial bit manufacturers will have one. They are recommended to be used only in a cnc spindle though.

11/24/19       #3: Resin resources ...
Mark B Member

$100 for anything other than a simpe 2 flute brazed carbide tool is cheap.

With regards to your resin pursuit I would caution you to #1 that you may be coming in towards the tail end of a trend but of course who knows how close to the tail. And #2 I have no way to quantify it but always keep an eye out, but I have a feeling your going to see a lot of resin tables in the landfill in the not too distant future but I guess the upside is it fueled an economy for a while.

There are so many (to me) flawed concepts with regards to the entire process, material, interface between wood/metal/resin, and more, that I cant believe there arent already many many failed items out there that incorporated the process. No different than the myriad of posts and questions on the sites with regards to the problems of wood movement in conventional woodworking.

I choose to leave that stuff to the garage shop guys who seem to be able to escape liability or to the shops that seem to have clientele that will pay for the most stable material that may still fail but the maker is surely covered in their contract and the client likely has enough money that when a 20K table goes south in a few years they just commission another.

11/25/19       #4: Resin resources ...
rich c.

I'd really love to hear how those river tables handle wood movement after several seasons. There has to be a lot of partially dried slabs used, not helping things one bit. The second thing is how careful owners are with preventing scratches in the resin. I read a post from a slab seller who has had to surface a lot of river tables. He claims that builders pour the resin and are not careful to control the resin that runs under the table during pouring. He says that sets up an issue with the resin cure and actually pulls the table out of flat. Personally, I hate the tables!

11/26/19       #5: Resin resources ...
Thomas

We jumped on the slab and river tables as quick as we could. All we do is flatten them on the cnc. Most builders do not listen to reason and we end up flatten the same project for same costumers over and over again. We used to try to explain the problems with their building methods but they do not listen. Works out great for us...they keep bringing them back for more cnc work.

11/27/19       #6: Resin resources ...
kevin

I would agree with Mark, id say we're on the tail end of this wave ( and I cant wait for it!!) I hope it all goes with the " Live Edge"/ "Slab Table" fad too. You can tell its starting to reach its peak when Lowes is selling "slabs" for $100 down the main drags of the store. Perhaps when all this nonsense is over we'll be able to buy wood with bark on it for less then 1k, the guys selling wood right now are printing money!!


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)