|Home » Exchanges » Industry News » News Item||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Thermwood Adds "CNC Access" To Its Award Winning Cut Centers6/24
Dale, IN June 18, 2015
Since the introduction of Thermwood's innovative and award-winning Cut Ready Cut Center, we've received requests to allow access to CNC functions of the Cut Center while also preserving the basic Cut Center functionality and simplicity of operation.
To address these requests, Thermwood is proud to announce we have added “CNC Access” to our Cut Center machine. This gives you the following expanded flexibility:
You can operate the system solely as a Cut Center with no CNC Programming required.
You can also operate the system as a CNC router in the traditional manner, running programs generated with virtually any CNC software.
Plus, using eCabinet Systems software and following specific design protocols, you can custom design products and add them to the Cut Center libraries and then those items can be machined by the Cut Center with no further programming (Note: In addition to doing it yourself, Thermwood offers this type of product development as an optional service).
Best of Both Worlds: Switch Between a CNC router and a Cut Center
Thermwood has created a simple way to switch between operating as a CNC router and operating as a Cut Center to assure that all machine parameters are properly reset and that the standard Cut Center tooling is properly installed, checked and ready to run.
We believe this approach dramatically expands the capability and flexibility of the Thermwood Cut Center, without losing its ease of use, yet still providing technical users new options to benefit from this new technology.
The Bottom Line...
Please call us today at 1-800-533-6901 or email email@example.com for more information.