|Home » Forums » Cabinet and Millwork Installation » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Looking for a mini jobsite compressor1/17
Im looking for some suggestions on a mini compressor that will only be used to run my air nail guns. Something mini and light weight.
Please provide links if able.
I own the 1 gal senco and loved how light it was but a now it leaks due to a rusted/cracked weld at the tank. Cheap but good only for trim nailers. I now have a rolair 2.5 gal 1 hp unit. Much higher output and very quiet which I gladly pay extra for. Somewhat heavier but still much lighter than my older pancake compressor.
I have the Senco PC1010, very light weight and keeps up with one trim gun nicely.
I have the Senco PC1010 also. Nice and light and quiet. Will keep up with a single gun easily. You can store it in your truck if you have side boxes.
Thx for the feerback! Menards, a large home improvement center here in Chicaho has it ion sale for 119.00. Looks like I'll be going there after werk.
The current portercable compressors regulator is turned to its apparent max or the regulator knob is broken. I went to a home improvement center to find a new regulator, but cant find one that has a air outlet for the hose coming out of the motor to attach to. My three thoughts are....
1. The easy fix and buy a new one
Thank you to everyone who took their time to respond.
I did buy the senco you guys talked about. I will get to use it in the next few days.