Cabinet and Millwork Installation

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

making my own cabinet jack

6/22/17       
kriz Member

Does any one have a cut out sheet for making my own cabinet jack?


View higher quality, full size image (800 X 600)

http://http://www.woodweb.com/knowledge_base/Making_Your_Own_Cabinet_Jack.html

6/24/17       #2: making my own cabinet jack ...
Pat Gilbert

Honestly (no snark intended) Does this device help more than it gets in the way?

6/25/17       #3: making my own cabinet jack ...
Kip

If you've got a full crew, perhaps it would be in the way, but for a small one or two man operation, there's no better helper.

6/25/17       #4: making my own cabinet jack ...
Pat Gilbert

Ok, color me skeptical

6/25/17       #5: making my own cabinet jack ...
Kip

Yellow is fearful or scared
Blue is mournful or sorrowful
red is anger
Exactly what color is skepticism?
Just curious

6/26/17       #6: making my own cabinet jack ...
Pat Gilbert

I'm skeptical that it is worth the trouble, just buy one if it is really needed.

6/26/17       #7: making my own cabinet jack ...
Gerry

I think it was Kerry Fullerton who posted a link to a plan for one. I could not find the plan but I think the pictures in this link will be enough along with the conversation about hardware.

http://www.woodweb.com/knowledge_base/Making_Your_Own_Cabinet_Jack.ht
ml

6/26/17       #8: making my own cabinet jack ...
Kip

My most humble apology sir. I too have built one out of wood. It was very HEAVY. So I trashed it and bought an aluminum one. Best money ever spent on installation tools no doubt.

6/26/17       #9: making my own cabinet jack ...
Pat Gilbert

I guess my point is that they have an entire gallery on the woodweb focused on shop built equipment.

IMO all of it is a bad idea.

7/5/17       #10: making my own cabinet jack ...
Jon Member

I have an aluminum one that I bought 10+ years ago. Absolutely worth the money spent. Irregardless of how many guys on the job, why have one guy holding the cabinet when he could be running crown, lighting etc.? I paid $600 - $700 for mine. That's less than a weeks wage for an employee.
We scribe the ends of many upper cabs to the wall, and the lift makes it easy to hold the cabinet perfectly plumb to make your marks.

7/6/17       #11: making my own cabinet jack ...
Bruce H

I had one and thought it was a waste of time. There are easier more accurate ways to set upper cabinets. We set the base cabinets first and then put T-blocks on top setting the upper cabinets on those. They can now be slid sideways or shimmed to fit the wall, what ever is needed. once on the blocks one guy can do it.

7/24/17       #12: making my own cabinet jack ...
David Member

What are t-blocks? Can you show a picture?

7/24/17       #13: making my own cabinet jack ...
Pat Gilbert

I think Bruce means blocks to set the upper cabinets on.

You would put the base cabinets in first, then use the T blocks and place the upper cabinets on top of the T blocks.

Or you could use hanging cletes.

Either way the cabinet jacks would get in the way more than help, IMHO.

Does make me wonder if the T blocks are better way to go than the hanging cletes though.

7/24/17       #14: making my own cabinet jack ...
Bruce H

I used suspension fittings for years but have a contractor that likes 18" deep uppers 60" tall. I wasn't comfortable using fittings for those cabinets. We changed to 3/4" backs, soon realizing it was much easier than the suspension fittings so we changed everything. The T-blocks are just too easy and the spacing between lower and upper cabinets is exact. I can set an entire kitchen on a few T-blocks, bolt them together and then shim to fit the wall. The upper cabinets sit plumb and level because the base cabinets were.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)