Sawing and Drying

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

phase inverters pros and cons

1/30/15       
john Member

I am looking at a 16 inch radial arm saw that is 3 phase I need an inverter don't know anything about them any help appreicated

1/30/15       #2: phase inverters pros and cons ...
John Costin

If you are trying to run a 3-phase machine from a single phase power source you are looking for a 'phase converter'. Inverters produce AC power from DC power.

Everything you need to know about phase converters should be available on the internet or at your local library.

Best of luck,

John Costin
Veneer Services Unlimited
vsu@gwi.net
207-985-7221
Custom Veneered Products for the Woodworking Industry

1/30/15       #3: phase inverters pros and cons ...
EC Aumiller Member

The easiest way to do it is with a VFD... it can take single phase 220vac input and put out three phase 220vac... there are many available.. Go to bing or ebay and search for VFD.. just get one that will handle the HP of your saw...

On 3-phase, be sure your saw is turning in the correct direction BEFORE putting a blade on it... if it is turning in the wrong direction, simply swap any two of the hot wires to correct the rotation of motor...

You should be able to get one for less than $200...

You can also use a "Rotary Phase Converter" which is a motor/generator to develop three phase but is more expensive..

Also you can buy a "Static Phase Converter" but it will reduce the HP of your saw by 1/3.. ie, a 3HP saw will only develop 2HP...

The best was I have found is with a properly sized VFD..

1/30/15       #4: phase inverters pros and cons ...
rich c.

I'd be surprised that you could get a VFD for that saw for less than $200. I guess we don't know the motor size, but a 16" radial arm probably is at least 3 hp, probably 5. You might be able to get a Chinese VFD for that money, but I sure wouldn't trust those.
EC Aumiller, where do you buy your VFDs?
Maybe I'm missing out! I need a 5hp VFD for a custom wood lathe I am building.

1/30/15       #5: phase inverters pros and cons ...
EC Aumiller Member

eBay mostly... quick search shows item 221668300083 is a used Toshiba, good brand... from 100% seller.. no affiliation, etc

A used working unit will probably last a long time as failures are within a short time frame of manufacture usually..

There are also new units (from China) in the $200 range...
In reality, most VFD's are from China (sadly)..

Sold a 16" Dewalt RAS several years ago with a Chinese VFD and still working...

Only problem with VFD is you need to turn saw off/on via the VFD and keep motor wired to the VFD direct... however this also provides electronic braking to the saw also...

1/31/15       #7: phase inverters pros and cons ...
rich c.

I looked that one up "eBay mostly... quick search shows item 221668300083 is a used Toshiba, good brand... from 100% seller.. no affiliation, etc" and it's a 3 phase in. I need single phase in. I'm just nervous about getting support or early hour failure on the Chinese VFD and likely difficult customer service. Sounds like your experience is positive, I've just read a lot of the opposite on metal working forums.

2/1/15       #8: phase inverters pros and cons ...
EC Aumiller Member

ALL VFDs are 3 phase in, 3 phase out.. but they work with single phase also.. you have 3 input power lines.. pick any two and apply 220vac and you will get 3 phase out... they take the input, rectify it (change it to DC), then generate 3 phase AC output... study the different forums to learn how they work..
The folks who have trouble 99% of the time make one of two major errors..
First, they try to power them up without a load on them and it often ruins them.. they need a load constantly to limit voltages within the VFD..
Second, they overload them, they try to run a 5HP motor on a 1-2HP VFD.. the motor will run fine but as soon as you put a mechanical load on the motor (i.e. cutting a board), it tries to produce more HP and the VFD senses the overload and shuts down with an error..

2/1/15       #9: phase inverters pros and cons ...
rich c.

One more question EC. Do you oversize the VFD if running on single phase in? I've seen folks talk about at least 50% over rating. Like at least a 7.5 hp rated VFD for my 5 hp motor. Do you agree with that? Thanks for helping out!

2/1/15       #10: phase inverters pros and cons ...
EC Aumiller Member

It is a good idea especially if you will be using the full HP... The current on the input lines is greater on single phase so yes..

However, on the saw I had, it never came close to operating at the full HP as I used it to cut boards, etc to length and had a 5HP VFD on a 5HP motor and never had a problem..

But to be safe, Yes, put in a 50% greater vfd than motor...

If using it for a saw, then make sure it is set to run for full speed all the time..

If using it on a lathe, it is great to change the speed as needed.. put one on my old Powermatic lathe and it is so much nicer to be able to turn a knob instead of changing belts... same thing for drill press's

Also, on any equipment I always use the remote on/off function of the vfd so I can mount a switch on or very near the equipment in use for safety reasons..

2/2/15       #11: phase inverters pros and cons ...
john Member

what is a vfd

2/2/15       #12: phase inverters pros and cons ...
EC Aumiller Member

Please see this link...
http://en.wikipedia.org/wiki/Variable-frequency_drive

They are also a convenient method to go from single phase power to 3 phase power..


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)