NYle Kiln L200
9/24/15
Hi
I am new to wood drying and wanted to know if anyone has run into this problem
I recently bought a used Nyle L200 . It did not come with any vents so I decided to buy the Nyle power vent kit
The problem is that the vents do not open automatically. When the thermostat asks for the vents to open the fan does not produce enough suction to open them. Someone must go in the kiln and open them manually. When the temperature drops to the required level the fan stops and the vents stay open. They do not fall and close in on themselves. This also happens with the intake vent. They do not open by themselves. Someone must push them open. They then stay open until someone pushes them shut. Once open they stay opened.
Has anyone experienced this problem and is there a way to fix this. Nyle's says that they will replace the vents but they must be in the original packing and be in good condition. I do not have the original packing and am afraid that they will deem the vents not in good condition.
9/24/15 #2: NYle Kiln L200 ...
I am interested in getting a Nyle kiln, how old was the vents since you got them? If this is the best customer service they have I might look other ways.
9/24/15 #3: NYle Kiln L200 ...
The vent kit is brand new. I've only had them for 3 weeks
10/2/15 #5: NYle Kiln L200 ...
It sounds like you have the wrong stuff or don't have it connected correctly. Call Monday and we will straighten it out for you. 800-777-6953 Ext 203
Nyle
2/24/16 #6: NYle Kiln L200 ...
I also have purchased a L200m with power vents but haven't had it shipped yet please let me know what happens