screen door

Listing #762 Listed on: 07/01/2007 Company Name: f3 carpentry
Name: fred

i made this screen door for a customer who wanted it to match his existing (phillipene)mohagany door with v groove's. here it is...

(No images available for this project.)
0 Photos
Social Media:
Viewer Comments:
Posted By:chris
looks great. what type of joinery / glue did you use to connect the segments of the arch?
Posted By:fred
sorry for not responding sooner! i used a lap joint on the sides and 1" t&g on top. glued with two part epoxy. since the door is 1" thick i morised a 1/4 x 6" groove on the edge of joints then epoxied in a piece of steel for additional strength.then a plug to hide steel.
Posted By:fred
the moulding on the outside is 2" thick to allow clearance of door handle. it was glued with waterproof titebond(the white stuff)

Add Your Comment:

*Enter the correct numbers into the field below:

Date of your Birth:

WalzCraft Original Saw