Ocala Hardwoods & SawmillListing #232 Listed on: 03/27Specializing in Entertainment Centers, Wallunits, Custom Projects. Hardwood Sales. Custom Sawmill Work, at the Shop or on Site. 17101 West Hwy 40 Ocala Florida 34481 Mon-Fri 8-4 352-489-2728 |
|
|||||||||||||||||||||||||||||||
On Site sawing being done here, nice stack after a couple hrs work, Crane on trailer was used to swing logs from pile to the mill.
Mill is setup in front of the shop, This mill can handle up to 21'6' long and up to 35' in Diamater. Powered by a 38hp Kohler.
Here is a photo of the windmill and tower up an running, nice rewarding project,, lots of fun building this one.
Here is the tower for the mill,, It was completely built in the shop, sideways, the tower is made of Rough Sawn Western Red Cedar, totla tower higth is 24' and the stance is 6' at the base,, the mill to be added was 8'2
Here is a photo of a windmill that we fabricated here in the shop, we did the sails, Vane, the whole thing,
Here is a custom high end computer desk, made of African Mahogany, Desk is on the assembly table, before clear coat was applied.
Stack of Oak out in front of the shop
|
|
|
||||||||||||||||||||||||||||||