Adhering Laminate to Gypsum Board
Contact cement or spray adhesive works well. June 7, 2008
Which glue could be best suited to join laminates to gypsum boards? Does the board need to be sanded before gluing for better results?
From contributor H:
Contact cement, and no.
From contributor M:
3M's Spray 90 works well also. I have used it for years in kitchens between the upper cabinets and backsplash. Only sand scrape high spots or specks that will hold you away from the wall.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Adhesives, Gluing and Laminating
KnowledgeBase: Adhesives, Gluing and Laminating: Glues and Bonding Agents
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2017 - WOODWEB ® Inc.