Adjustable Table-Height Hardware
Where to get parts for tables that can be raised and lowered. March 1, 2006
A customer wants us to provide a table for a craft-center we produced. Her kids range in age from 4 years old to 10 years old. She would like the table to be able to adjust in height, depending on the demographics of the day. Does anybody have any suggestions for how to make this table raise and lower in height?
From contributor A:
Hi-lo tables are not uncommon in the marine world. You could check marine supply stores. Richelieu Hardware in Canada has a sit-stand table hardware. There should be some comparable supplier in the US. Lee Valley has several adjustable table height hardware kits.
From contributor B:
Take a look at Hafele catalog.
From contributor C:
Doug Mockett too.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Furniture: Custom Furniture
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2017 - WOODWEB ® Inc.