Red cedar vs. white cedar siding
The differences between the two woods, specifically, their suitability for use as siding. October 17, 2000
Q.
Can someone please tell me the difference between these two woods?
Here in Wisconsin I have great access to white cedar. I have built a jig to saw beveled siding on my Baker sawmill, and the stuff coming off the saw looks the same as red cedar. With the price of fuel, I'm wondering if I don't have a market right in my back yard for this product.
A.
Northern white cedar (Thuja occidentalis) is an excellent wood and has been used for lumber, especially in Maine.
It is much weaker than Eastern red cedar; specific gravity (SG) is 0.31, versus 0.47 for red. Strength is 45,000 psi versus 61,000. White cedar is one of the weakest, lightest-weight woods in the USA.
Gene Wengert, technical advisor
From the original questioner:
What I failed to ask is this: My customers are questioning if the white cedar will weather and perform as well as red cedar in outside conditions?
A.
The decay resistance of the heartwood is just as good, but the strength is much lower, including nail-holding ability, strength as a leg (in furniture), etc.
Gene
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Lumber & Plywood: Wood Identification
KnowledgeBase: Primary Processing: Lumber Grading
KnowledgeBase: Wood Engineering: Wood Properties
KnowledgeBase: Knowledge Base
Would you like to add information to this article? ...
Click Here
If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to review our Forum Guidelines.
Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.
When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.
Return to beginning of article.
|
