Salvaging lumber from submerged wood
The best chance for salvaging lumber from submerged wood lies in cutting it quickly, and drying it slowly. 1998.
by Professor Gene Wenger
Q.
I have come across a piece of bog oak about 6-7 foot long which has been uncovered by machinery working on a bog over here in Ireland. A piece I found previously has cracked significantly and I don't want the same thing to happen to this.
A.
It is not uncommon for submerged logs to crack excessively because there are anaerobic bacteria that develop in the log, creating an enzyme that destroys the wood structure.
For best results, have the log sawn as soon as possible, into as thin of pieces as possible, and then dry the lumber as slowly as possible. Some fungal mold can be expected.
Professor Gene Wengert is Extension Specialist in Wood Processing at the Department of Forestry, University of Wisconsin-Madison.
Click on Wood Doctor Archives to peruse past answers.
If you would like to obtain a copy of "The Wood Doctor's Rx", visit the Wood Education and Resource Center Web site for more information.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Primary Processing: Air Drying Lumber
KnowledgeBase: Primary Processing: Kiln Operation
KnowledgeBase: Primary Processing: Lumber Grading
KnowledgeBase: Primary Processing: Sawmilling
KnowledgeBase: Wood Engineering: Wood Properties
KnowledgeBase: Knowledge Base
Would you like to add information to this article? ...
Click Here
If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to review our Forum Guidelines.
Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.
When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.
Return to beginning of article.
|
