Selling Wide-Belt Sander Time on the Side

      A wide-belt sander can help pay its way with occasional odd jobs for other woodworkers. May 13, 2005

We are thinking of upgrading our 24" drum sander to a 37" widebelt. The upgrade is more of a capacity issue, but the obvious benefits of a widebelt will be enjoyed as well. As a small shop, we will be looking for any way to leverage this purchase to our advantage. It will not run all the time (far from it, in fact), but the convenience of having it on-site makes the purchase tempting. Do any others have experience with selling time on a widebelt machine to other small shops/hobbyists? How do you get the word out that you offer such a service? Is it overly disruptive to your own work or schedule? Even generating a few hundred dollars a month to cover abrasives, etc. would be helpful to make this purchase "'pencil out."

Forum Responses
(Solid Wood Machining Forum)
From contributor B:
I just paid a buck a minute for the use of another shop's wide belt and I help run the material. It was worth it to me and the wide belt made a few extra dollars. This was done at the end of the day so the shop was not disrupted.

From contributor J:
In my opinion, this would be an accident waiting to happen. There is no way I'd let someone else use my high dollar equipment. The liabilities are too great as far as someone getting hurt. They will also tear up your sander and leave you holding the bag. Keep all non-employees out of your shop.

Now, you could do custom sanding for other shops, charge a square footage rate and price it where you can make some money. Do the work with your own employees, though. In the 80's we ran a jillion feet of pine flooring through our wide belt and pretty much paid for the thing doing it. This is a very versatile machine and I have done some non-cabinet jobs with mine, such as resurface used butcher block table tops for a local restaurant supply co., sand door/window jambs, presand T & G flooring, sand beaded ceiling, sand stair parts, sand glued up table tops and panels for trim carpenters/hobbyists. My lumber supplier/lumber yard sends a lot of folks my way.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Cabinetmaking

  • KnowledgeBase: Cabinetmaking: General

  • KnowledgeBase: Solid Wood Machining

  • KnowledgeBase: Solid Wood Machining: General

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2019 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article