Small kiln construction and systems

Advice on where to find information on small kiln construction and operating systems.

Q.
I had a 24x50 dry kiln until late December when we lost it to fire. I'm ready to rebuild, and need advice on a better kiln system and a building. We dry Eastern cedar, yellow pine, red and white oak, and some walnut and cherry.


Contact any of the major kiln companies for advice on a building, controls, and auxiliary equipment. There are two basic buildings: aluminum prefab and masonry. Most kilns for the species you dry would be steam/boiler heated, but your small size suggests that maybe DH would be a possibility.

Besides getting input from kiln companies, hiring a consultant is another option.
Gene Wengert, forum moderator