Urea Resin Glue on Paper-Backed Veneer
Urea resin glue works well with paper-backed veneer (but scuff sand the paper first). October 19, 2013
Can you use urea resin glue on a paper backed veneer?
From contributor P:
Absolutely. I've done it dozens of times, specifically with Unibond 800. I can't think of a glue that would be better.
From John Van Brussel, forum technical advisor:
Yes. I would advise that you scuff sand the paper backing to get rid of the machine glaze on the paper back. This will allow the glue to get better purchase.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Adhesives, Gluing and Laminating
KnowledgeBase: Adhesives, Gluing and Laminating: Glues and Bonding Agents
KnowledgeBase: Veneer: Techniques
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2018 - WOODWEB ® Inc.