Vertical Lift Door Hardware
Tips for installing a cabinet door that pulls out and then raises up. December 7, 2008
I have an application in a media cabinet where I have a subwoofer below the plasma TV. The design on the cover for the subwoofer calls for a panel that is 1 1/2" in overall thickness. Since this panel winds up being 36" wide and 24" high I thought that it would be a great application for a lift up door. I would like to set the panel flush with the adjacent doors and drawer fronts but to do that I will have to set the door 3'4" further back than normal.
Question; will the Aventos hardware allow me to come out 3/4" plus before it starts its upward travel? I guess it’s like if the panel above the lift up door was offset out 3/4". How about it guys, anybody wrestled with this problem before?
From contributor G:
I don’t know if this will work for you, but I've done several of these vertical lift doors with hardware I bought from Westlund Distributing.
Click here for full size image
From contributor D:
In answer to your question, with Aventos HL lift system the door moves first in a horizontal motion roughly 3" in a slight arch and then lifts vertically. I can't see the 3/4" backset being any problem at all. Good choice of hardware!
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Cabinetmaking: Cabinet Door Construction
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2017 - WOODWEB ® Inc.