Waiting to Saw Douglas Fir Logs
Doug fir logs may be all right if left sitting for a year before sawing. May 14, 2006
I have some Doug fir that I need to cut now - 18-28" diameter, 100-125' lengths, a few hundred. But I can't get to milling it for at least a year. How long can I let it sit before sawing, and what should I do to keep it from checking, rotting, etc.? I live in southern Oregon and it gets to the 100's in the summer with low humidity and rains 20-30" in winter.
(Sawing and Drying Forum)
From contributor D:
I often cut fir that has been down for at least a year. Bit of bug damage, but that's about it. It's lighter and often the bark falls right off. I wouldn't leave it for two years, though. Be interesting to hear the Doc's input on this. I'm in southwestern BC. Just as hot in the summer, but dryer in the winter.
From contributor P:
I cut up some logs that were harvested last April today. Ponderosa pine and Doug fir. Loose bark, but excellent lumber. I'm in northwest Montana.
From contributor J:
I'm not far from you, and around here, Doug fir tends to go bad faster then any other species. Pines do real well, except for blue, unless you strip the bark. I've milled some that were down as long as 3-4 years.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Primary Processing
KnowledgeBase: Primary Processing: Sawmilling
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2018 - WOODWEB ® Inc.