Total Finishing Supplies

Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: sand paper

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

sand paper

7/20/16       
Wayne Even

Website: http://anythingwoodcabinets.com

What is the best brand / model number of sandpaper for scuff sanding between coats of sealer / lacquer / pigmented lacquers etc.

7/20/16       #3: sand paper ...
JoeW Member

The SurfPrep sanding system. It's great. Watch the videos from the add on this site.

7/20/16       #4: sand paper ...
Leo G

This is what I use.

Sandpaper for Scuff Sanding

7/20/16       #5: sand paper ...
Hen Bob Member

I use the Mirka Goldflex. Supergrit.com

7/21/16       #6: sand paper ...
Bruce Hand Member

I use a Mirka Molded Palm Sanding Block &
Mirka Abranet 5" H&L Mesh Discs
80-1000 grit.
Lasts for ever, does not clog and can be rinsed out and reused

7/21/16       #7: sand paper ...
Steve

Wayne - full disclosure, I sell sandpaper. So, there isn't one correct answer. I sell a lot of Mirka to some very high-end woodworkers. They seem to like the Abranet for the reasons stated above. I other customers that prefer 3M gold discs in a 320 grit for scuff / between coat sanding. You can save a little money (sometimes) with the very inexpensive no-name import stuff like the 1st guy's recommendation, but when you start to have finishing problems, you won't know if it is the prep (sanding), spraying, or a bad batch or poor mix of your spray material. Staying with a quality abrasive eliminates one step from the occasional problem-solving process. Now if you just do cheap work, cheap stuff is OK. If you want to turn out a consistent high-quality product, stay with high-quality, consistent supplies.
If you want to call me & mention WoodWeb, I'll give you an extra discount. Ask for Steve Sr.

7/21/16       #8: sand paper ...
Leo G

Well Steve. I've been finishing for 20 years and bouncing around within a lot of sandpapers. I've tried lots. Expensive, cheap, middle of the row. This is what I've settled on after years of finishing. Never had a problem that I could attribute to the sandpaper. It's inexpensive and lasts pretty well. Cuts nice. But all I'm talking about is the 320 and strictly for finish work. I use a wood block with some self stick felt on it as a cushion. Works very well.

I wouldn't have recommended it if I ever had problems or if it didn't work well. I wouldn't buy it either.

7/21/16       #9: sand paper ...
Robert Member

3M, the Grey stuff works well for my applications. Not sure if the Eagle Brand is still available but it worked very well too.

7/21/16       #10: sand paper ...
kevin

3M Purple

7/21/16       #11: sand paper ...
Abrasive Member

That really depends, I use festool brilliant 2, sialac silicon carbide with 103 hole discs, Wurth Zebra, Wurth Arizona and Wurth ICE! But my favorite cheap sanding discs are the Indasa Witheline they are so cheap and so good :)

7/21/16       #12: sand paper ...
Adam

Buy the stuff made in europe. They have a different grading system. Something like 95% of the grit on a disc is the 320 grit. Whereas even the US stuff(with the exception of the expensive 3M pro stuff) is something like 60% correct grit size.

I've been using the Mirka Gold sheets, 6" discs, their Abarnet disc and depending on the project their maroon scotchbrite pads.

All of their products are good value compared to all the other brands besides Klingspor. Our plywood supplier also happens to carry Mirka, but I also buy it from other sources.

Definitely get stereated gold(better) or white

7/22/16       #13: sand paper ...
jonathan mahnken

norton or 3m. whichever is most convenient to purchase. the off brands ave a much shorter cutting life. i dont have a solid mirka supplier in my area but it is nice sand paper

7/23/16       #14: sand paper ...
Bart

I've been using Norton for a long time. I used Mirka as that is what I was exposed to starting out. Good stuff but more expensive. What Adam said about the grit sizing is right. Their 320 is probably equal to 400 of other mfgs. I think in the past especially WB finishes were much more sensitive to contamination from grit adhesive. Supposedly the Norton adhesive was/is not friendly but I've never had a problem.

7/24/16       #15: sand paper ...
Adam

Bart,

The euro grit size vs US/everybody else makes a huge difference with clogging,abrasion speed and consistent depth of scratch.

Its visible under finishes.
High quality 320 grit is not visible. The cheaper paper you can get coarser grits mixed in with the graded grits. Meaning there can be 180/240 grains on 320 paper.

I agree that some of the WB manufacturers have changed their formula's to work with the white stereated papers. Back in the 2000's we had to use the gold or there could be fisheyes depending on the brand.

I still use all gold products, because they work, and Mirka only makes gold.

If you read the boxes of 3M and Norton often the prograde stuff is made in Europe.

7/24/16       #16: sand paper ...
Kit Mosden

Website: http://mosdens.com

I love the Abranet paper but have trouble buying it. Who has the best mail order pricing on it?

7/30/16       #18: sand paper ...
Adam West  Member

Website: http://www.surfprepsanding.com

Surf Prep has never been called "inexpensive no-name import stuff" before. We have gone more than 10 times longer than the net abrasive in quiet a few applications. contact me if you want more info.

7/30/16       #19: sand paper ...
jonathan mahnken

The problem with specialty abrasives is availability. Where are you going to find a surfprep/mirka supplier who is open on a saturday at noon when you accidentally run out of sandpaper. Even on a weekday you would have to wait at least one day after you place the order to receive the product. After a quality brand name, longevity has more to do with the backup pads that you are using.

7/30/16       #20: sand paper ...
Adam West  Member

Website: http://www.surfprepsanding.com

We work through distribution and we have great coverage throughout the nation. Many of them have that kind of relationship with their customers.

7/30/16       #21: sand paper ...
JoeW Member

My local Wurth Wood Group Stocks the SurfPrep, all pads and accesories. I have never had a problem getting it.

A&M supply is 2 hrs away and the rep will get it to me the next day if I need it. I always keep ahead several boxes anyway.

As Adam said, it last a lot longer then the other major brands you mentioned. I have tried them all. No build up. Just hit the piece and/or the pad with it a little air and its gone.

7/30/16       #22: sand paper ...
Steve

Website: http://www.maxprod.com

If you are having trouble finding a good source, we stock the Mirka Abranet as well as the Mirka Gold in Hook and PSA, as well as the 3M Purple, cubitron II, and 216U and 236U Gold discs. We can also get Norton and provide excellent pricing on all if you call Steve 215-699-2224 and mention WoodWeb. Regarding the European versus American grits, the difference is how the grit is measured. the number, say 320, is the number of holes in a 1" square screen (mesh). In Europe, it's the number of holes in a square centimeter. Since the centimeter is slightly shorter, it will be finer. The US, or CAMI 400 grit is very similar to the European, or FEPA P320. (Whenever you see the "P" in the number, that indicates FEPA grading.)

8/16/16       #23: sand paper ...
Adam

Steve,

I agree with you on the grit spec. 220 grit = 240 grit.

The bigger issue is the one I describe above. If you look at typical Norton paper at a hardware store, you can visually see different grit sizes on the same paper.

Not an issue with the prograde papers, but it can be with cheap USA or cheap paper in general.

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)