Instructions: Lumber Weight CalculatorMoisture Content:
Enter the moisture content (MC) at which the lumber was scaled (i.e. when the board foot volume was measured). Decimal values are acceptable. Do not enter fractions, and do not enter the percentage sign after the value.
No. of Board Feet:
Enter the board footage value as measured at the moisture content (MC) indicated in the Moister Content field above. Leaving the board footage value at the default (1000) will produce a resulting weight in pounds per 1000 board feet. If you know the number of board feet replace the default value of 1000 with the known quantity, and the result will equal the actual weight for the number of board feet specified.
Enter the actual measured width of the lumber, in inches and fractions of an inch.
Enter the nominal measured width of the lumber, in inches (and fractions of an inch if appropriate).
Enter the actual measured thickness of the lumber, in inches and fractions of an inch.
Chose a nominal thickness of lumber. Lumber less than 3/4 inches thick should be entered as 3/4.
Enter the length to the last full foot. Do not round up to the next foot. Any inches entered will not be considered in the calculation.
"Calculating the weight of lumber" is a detailed article regarding the calculation of Lumber Weight. If you have any questions regarding the methodology used in WOODWEB's Lumber Weight calculator, we suggest that you post your question at our
Sawing and Drying Forum.
You may also want to review our "Weights of Woods" chart ... if you know the total board footage value you can use this chart to determine the estimated weight.
Click Here to Access the Lumber Weight Calculator
All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.
335 Bedell Road
Montrose, PA 18801
Contact WOODWEB Copyright © 1996-2021 - WOODWEB ® Inc.