WOODWEB's Veneer Forum - Message Index

Best contact for wood backed veneer? posted by: Chad -- 5/15
0 responses

CNC Routers: What Are Your Plans? ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 5/6
0 responses

Door cores posted by: Tara -- 5/3
2 responses -- 5/4

Glue Up Misshap posted by: Tim G -- 5/2
17 responses -- 5/6

Veneer bubbles 5 years later...help posted by: Ken Irish -- 4/28
11 responses -- 5/18

20mil vs 10mil posted by: Leo G -- 4/23
16 responses -- 4/25

labor cost posted by: Spangler Carpentry -- 4/16
2 responses -- 4/23

problems of discoloration of fumigated larch veneer after sanding posted by: Deepak Tapkir -- 4/5
4 responses -- 4/11

20 mil paperback seperating from backing posted by: jeremy -- 4/1
4 responses -- 4/29

Social Media: Does Your Business Participate? ... vote in WOODWEB's Poll posted by: Carl Hagstrom -- 4/1
0 responses

Doing a curved or arched top posted by: Jeffrey -- 3/28
2 responses -- 3/28

Question about pressure sensitive veneer over latex paint posted by: Dan Oldejans -- 3/26
3 responses -- 4/17

Best relative humidity for a veneer operation? posted by: Paul Downs -- 3/21
5 responses -- 3/31

Wood Filler posted by: Chris Collins -- 3/21
3 responses -- 4/17

Veneering in the 3rd world posted by: Westsailor -- 3/16
9 responses -- 3/22

suggest some pressing tricks for veneer having thickness variation. posted by: Deepak Tapkir -- 3/15
6 responses -- 3/23

Profile Wrapping Sources in Mexico posted by: Bryan Hankel -- 3/13
0 responses

Engineered Veneer posted by: Jamie Holling -- 3/9
3 responses -- 3/12

Polishing Polyurtene Zebrano Veneer posted by: Hussamtk -- 2/22
2 responses -- 2/22

dispenser posted by: Joseph -- 2/21
0 responses

Phenolic backed veneer bubbling posted by: Slater -- 2/20
2 responses -- 2/20

problems of tape marks on veneer. posted by: Deepak Tapkir -- 2/19
8 responses -- 2/25

zebra wood posted by: mike -- 2/15
1 response -- 2/20

regarding veneer posted by: Deepak Tapkir -- 2/14
5 responses -- 2/26

End grain veneering on MDF/Plywood posted by: Donald -- 2/14
0 responses

Veneer / Construction advice for side table posted by: Donald -- 2/10
0 responses

flexable veneer lamp shades posted by: Scott Grove -- 2/6
4 responses -- 2/17

finish/veneer roughness posted by: Kevin Jenness -- 2/1
1 response -- 2/20

Royal Black Palmwood Veneer & Solid posted by: Samantha -- 1/30
0 responses

peel and stick veneer, does it hold up? posted by: dan -- 1/29
8 responses -- 4/17

cabinet part layups with sheet veneeer. posted by: kevin jenness -- 1/19
3 responses -- 1/23

pva tape for veneer posted by: Na -- 1/14
3 responses -- 4/17

paper backed vs wood backed veneers posted by: EA Custom -- 1/10
2 responses -- 1/11

Applying curled veneer panel posted by: Jeff Gray -- 1/5
2 responses -- 2/8

removing the vinyl woodgrain material from cabinet posted by: Jeffrey -- 12/18
4 responses -- 4/17

3 mm banding posted by: jason -- 12/6
1 response -- 12/7

about fleeceback paper problem. posted by: Deepak Tapkir -- 12/1
1 response -- 12/5

MDF edge showing up through finished veneer posted by: Mike -- 11/24
4 responses -- 11/28

Tightest radius for paper back veneer bending? posted by: B.H. Davis -- 11/22
4 responses -- 4/17

New press posted by: John Bishop -- 11/22
1 response -- 11/22

Troubles with the New Unibond 800 Formula posted by: JAM -- 11/21
5 responses -- 1/23

Kuper stitcher wanted posted by: Scott -- 11/21
3 responses -- 12/7

Intermediate veneer layer posted by: Roger -- 11/19
4 responses -- 11/30

Contact cement posted by: John Bishop -- 11/17
4 responses -- 4/17

veneer newbie question posted by: chris -- 11/11
4 responses -- 11/20

Clamping Cauls & Veneer posted by: chad -- 10/30
6 responses -- 11/11

Herringbone Veneering posted by: Benn -- 10/29
1 response -- 10/30

platen size as to project size posted by: Jeffrey -- 10/28
5 responses -- 10/29

baltic birch as substrate posted by: jason -- 10/27
3 responses -- 11/25

Chinese veneer posted by: lary -- 10/26
1 response -- 10/28

Pin hole repair in Veneer Vacuum Bag posted by: Jeffrey -- 10/26
7 responses -- 10/28

Veneer over simple mdf structure posted by: chad -- 10/20
5 responses -- 11/21

damaged veneer posted by: Ed -- 10/1
3 responses -- 10/2

Industry Standard Veneer Thickness posted by: Mark Morgan -- 9/6
4 responses -- 4/17

prefinished edgebanding burns posted by: antonio -- 9/3
4 responses -- 9/17

Glue for cocobolo veneer posted by: Steve Holman -- 8/28
2 responses -- 10/26

Lifting veneer posted by: Sea444 -- 8/28
3 responses -- 8/29

Using Vacuum bag for top of small cabinet posted by: Jeffrey -- 8/21
1 response -- 8/21

A Few PSA Veneer Questions posted by: Frank Parisi -- 8/16
6 responses -- 4/17

Brazilian Oak posted by: Jan Oostland -- 8/13
2 responses -- 8/14

Breather mesh alternatives posted by: John Flowers -- 8/13
1 response -- 8/13

AWI Custom grade question - joint posted by: roland -- 8/10
3 responses -- 8/15

Wavy east indian Rosewood posted by: Jeffrey -- 8/5
2 responses -- 8/9

Can you sand and repaint over veneer?? posted by: Robert -- 7/31
3 responses -- 8/2

Using wood filler under veneer posted by: Jeffrey -- 7/26
3 responses -- 8/5

General finishes Brand water based finishes posted by: Jeffrey -- 7/24
0 responses

exterior veneering posted by: ryan -- 7/19
4 responses -- 8/1

Balsa core posted by: Joseph -- 7/18
2 responses -- 8/23

Fasco Vacuum pump posted by: Jeffrey -- 7/11
1 response -- 7/12

Applying veneer to Speaker cabinet face posted by: Jeffrey -- 7/9
4 responses -- 7/26

quilted maple guitar top posted by: jm -- 7/9
3 responses -- 7/12

Stacking Laminations in a Vacuum Bag posted by: David R Sochar -- 7/2
3 responses -- 7/12

Problem with new veneer backer posted by: Fred Taylor -- 7/2
1 response -- 7/13

sketch face layup posted by: rich -- 6/21
1 response -- 6/22

Rosewood precautions/techniques posted by: Rob -- 6/15
1 response -- 6/16

Left hand veneer saw??? posted by: Dan Cook -- 5/11
4 responses -- 5/15

Veneer over Extira posted by: Stelios Gianniotis -- 5/5
1 response -- 5/7

Balancing paper back panels posted by: Rob -- 4/28
7 responses -- 5/10

hardwood edge on veneered doors posted by: bill walton -- 4/27
1 response -- 4/28

dimples in pressed veneer posted by: Mike -- 4/23
7 responses -- 4/28

2-Ply vs 2 Separate Veneers Crossbanded posted by: Noel -- 4/21
22 responses -- 5/10

Bowed panel posted by: andy k -- 4/20
6 responses -- 4/20

Cold press clamping posted by: Rob -- 4/12
2 responses -- 4/13

veneer for skateboard posted by: jack -- 4/10
1 response -- 4/10

Tabu Vener posted by: Steve -- 4/9
7 responses -- 4/10

problem with beech veneer posted by: Eli Patis -- 3/27
6 responses -- 4/5

MDO as veneer substrate? posted by: Jeff Roltgen -- 3/26
3 responses -- 3/26

Veneer type for exterior door posted by: Brian -- 3/10
2 responses -- 3/12

veneering pre finished plywood posted by: andy k -- 3/4
8 responses -- 3/26

Raw veneer posted by: G.BRADLEY -- 3/3
0 responses

glycerin based recipe for veneer softening posted by: Stephen -- 2/29
2 responses -- 4/17

MDF core showing through light veneer. posted by: Ian -- 2/22
14 responses -- 3/3

Veneering a bay window in place posted by: Scott -- 2/18
6 responses -- 2/23

disfigured veneer posted by: lary -- 2/13
1 response -- 2/14

veneer over lumber core posted by: dave -- 1/30
3 responses -- 1/31

Backing veneer with paper posted by: Ian Hawthorne -- 1/13
3 responses -- 4/9

Balanced panels with paper backed ? ? ? posted by: Bill Burscher -- 1/12
1 response -- 1/12

Relative cost of material posted by: Dropout -- 12/28
9 responses -- 1/12

plastic material at of recinstituted veneer posted by: slatchus -- 12/19
4 responses -- 12/20

Skateboard press needs to heat the vaneers posted by: shaun -- 12/16
5 responses -- 5/2

Veneer creep on factory panels posted by: Joel -- 12/13
2 responses -- 12/16

The Veneering Book by David Shath Square posted by: Simon -- 12/13
0 responses

looking for veneer layup posted by: PaulR -- 12/1
3 responses -- 12/6

Inlay wide veneer on ply/mdf? posted by: Kyle -- 11/28
2 responses -- 1/4

Flexible veneer for wooden boxes (e.g. wine) production posted by: Konstantin -- 11/21
3 responses -- 11/21

Steam bending 1/8" thick 6" wide, 50" long hardwood boards into 14" circles posted by: Jon -- 11/11
1 response -- 11/17

Is crossbanding necessary with 1/16" thick veneer posted by: Steve Holman -- 11/7
4 responses -- 11/29

Solution for veneer checking? posted by: Steve Holman -- 11/7
23 responses -- 12/3

My Skateboard press, sometimes turns out boards with bubbles posted by: shaun -- 10/29
5 responses -- 11/4

Cold Press V's Hot Press posted by: Stephen -- 10/26
3 responses -- 2/19

Backer question posted by: Jim -- 10/13
1 response -- 10/14

Wide wood veneer rolls w/ adhesive backer? posted by: Alex -- 10/12
2 responses -- 10/13

Paper white veneer posted by: Tyler -- 10/11
4 responses -- 10/12

Veneer jointing / trimming posted by: Stephane -- 10/4
9 responses -- 1/26

Vacuum pressed "Skimboard" project posted by: Skimboarder -- 9/27
9 responses -- 9/30

Hide Glue with Paper Backed Veneer posted by: Joe -- 9/26
7 responses -- 10/11

looking for white oak construction veneer. posted by: Mike S -- 9/22
2 responses -- 9/23

building a veneer hammer posted by: Joe -- 9/12
9 responses -- 9/23

Learning to veneer posted by: Alec -- 9/4
2 responses -- 9/14

reasonably priced burl posted by: Joe -- 9/4
5 responses -- 9/8

veneer won't take stain posted by: Joe -- 8/13
25 responses -- 9/7

Quarter Sawn Veneer posted by: Scott Poplin -- 8/12
2 responses -- 8/18

Veneer Class posted by: Robert -- 7/12
9 responses -- 7/27

Cold vs. Hot Pressing posted by: David -- 7/5
3 responses -- 7/13

Buying a vacuum pump help posted by: Chris -- 7/3
10 responses -- 10/11

Marquetry with hide glue posted by: Adam -- 6/25
4 responses -- 7/13

Bowed Panels posted by: Prateek Chawla -- 6/11
9 responses -- 6/14

Veneer on steel doors posted by: Brad -- 6/5
3 responses -- 7/14

Pinch roller with Kerfcore and contact cement posted by: Bill -- 6/2
1 response -- 6/5

substrates posted by: mikemcnerney -- 5/30
4 responses -- 6/4

Help! Looking for 0.1-0.2mm adhesive backed veneer! posted by: Joanne -- 5/19
1 response -- 11/29

Cracked melamine end panels posted by: JJ -- 5/17
2 responses -- 6/14

Eliminating Veneer Open Seams When Using A Kuper Splicer posted by: Jerry Mulka -- 5/9
5 responses -- 6/20

veneering a guitar body posted by: Quinn McCarthy -- 5/8
6 responses -- 5/24

Veneer direction posted by: Dave -- 5/7
1 response -- 5/8

Solid wood edge thickness? posted by: noahmartin -- 5/7
1 response -- 5/8

Edgebander choice - please help! posted by: pccbc -- 5/3
4 responses -- 5/10

heating vacuum veneer press posted by: Dan Cook -- 4/30
6 responses -- 5/8

First Veneer repair posted by: Tom Cigno -- 4/28
2 responses -- 4/30

fire rated nauf mdf core and fumeing posted by: rob -- 4/22
3 responses -- 4/27

Sand Shading posted by: Tomm -- 4/19
1 response -- 4/20

Edgebanding posted by: Jan Efraimsen -- 4/12
1 response -- 4/28

yellow glue and iron on posted by: phil v -- 3/31
5 responses -- 4/12

Heater Bars posted by: Chris -- 3/22
2 responses -- 3/23

Veneer Checking posted by: Kris -- 3/18
2 responses -- 3/20

Sanding wavy honeycomb panel posted by: Edison Fernando -- 3/8
2 responses -- 4/10

veneer lifting one year later posted by: mike -- 3/6
6 responses -- 4/9

Veneer Supplier posted by: Andy -- 2/25
5 responses -- 3/3

Yellow Birch posted by: jason -- 2/22
0 responses

Quality Issues Birch Veneeer posted by: TJ -- 2/19
1 response -- 2/19

Setting up a large vacuum pump posted by: Keith Mathewson -- 2/18
3 responses -- 4/9

Advice please: double-sided raised veneer panels posted by: Michael Mandlin -- 2/18
3 responses -- 2/22

Seamless Edgebanding posted by: Josh Andersen -- 2/13
3 responses -- 5/6

Need your thoughts posted by: ma -- 2/10
5 responses -- 2/11

Gluing veneer posted by: john -- 2/8
6 responses -- 2/18

need to make 1/30" by 1.75" by 34" strips. How? posted by: Pete -- 1/28
12 responses -- 2/20

On storing veneer... posted by: Bill Burscher -- 1/28
1 response -- 2/17

White lines in Veneer posted by: Greg -- 1/23
3 responses -- 5/9

Veneer Craftsman in Concord / Charlotte N.C. posted by: spectre1 -- 1/19
2 responses -- 1/26

Really thick veneer posted by: Steve L -- 1/19
6 responses -- 2/17

1/8" - 1/4" bead board...... posted by: AGC -- 1/15
0 responses

wrinkles in veneer posted by: Dan Cook -- 1/14
2 responses -- 1/30

Using Jacaranda "Sanfoot" for a veneer job? posted by: Marc L. -- 1/5
1 response -- 1/8

Diehl Splicer chewing up veneer - Help! posted by: Paul Downs -- 1/4
6 responses -- 1/9

Reconstituted Veneer posted by: Sharon -- 1/4
1 response -- 2/23

3m Peel and Stick 468 posted by: Jim -- 1/3
1 response -- 5/11

Banak Veneer or Comparable posted by: Patrick -- 12/28
0 responses

Frame press - panels not flat posted by: Ian -- 12/20
13 responses -- 12/29

Plywood Cylinders posted by: Brian -- 12/14
2 responses -- 5/30

Installing veneer over rounded edge posted by: Jeffrey -- 12/10
3 responses -- 12/13

veneer lay out posted by: Dennis Lilienthal -- 11/16
4 responses -- 11/18

Flattening veneer posted by: John May -- 11/9
5 responses -- 11/18

Bamboo Veneer posted by: Rich -- 11/2
8 responses -- 1/25

What wood species is this veneer? posted by: Sean -- 11/1
3 responses -- 11/2

Veneer panel fabrication service posted by: Cha -- 10/25
3 responses -- 11/29

question about backing veneer posted by: Chris P. -- 10/23
10 responses -- 10/26

Paulownia cooking schedule for veneer production posted by: Tamazi -- 10/23
0 responses

Qtr. non figured Eucalyptus posted by: Rich -- 10/18
3 responses -- 11/19

finishing lacewood veneer posted by: Justin Newmark -- 10/15
1 response -- 10/16

veneering an exterior door posted by: Randy Megyesi -- 10/13
3 responses -- 10/28

Door Staves posted by: Mark G -- 10/11
2 responses -- 10/25

vacuum pump posted by: Tomm -- 10/7
2 responses -- 10/23

Thoughts on buying a JOOS Jr hot press? posted by: Bob -- 10/7
1 response -- 10/12

Urea resin glue on paper back veneer posted by: Genne -- 10/6
3 responses -- 10/7

Best platen for vacuum bag? posted by: ck -- 10/3
6 responses -- 10/6

Boiling oak veneers to make paler? posted by: Dovetail -- 9/29
1 response -- 10/16

EDGEBANDING SUPPLIERS posted by: STEVE -- 9/24
1 response -- 9/24

can it done by vacuum press posted by: katz -- 9/11
2 responses -- 9/15

PSA adhesive with various veneer backings posted by: Chris Mroz -- 9/1
1 response -- 9/17

4'x10' Veneer posted by: Nathan -- 9/1
3 responses -- 9/9

Checking in veneer posted by: Rich -- 8/31
6 responses -- 10/28

Walnut Burl Veneer posted by: albert wright -- 8/28
8 responses -- 1/4

Reaction of veneer with finish posted by: Dave -- 8/28
3 responses -- 9/1

PSA veneer on Plastic Laminate posted by: Jim -- 8/19
1 response -- 8/21

veneer scalloped doors posted by: Orin Zelenak -- 8/14
5 responses -- 8/15

veneering oval table apron posted by: ben -- 8/11
4 responses -- 8/23

Veneering 72" round Tabletop posted by: Jim -- 8/10
7 responses -- 8/23

2" edge banding posted by: Anthony -- 8/5
1 response -- 8/7

PVA at 130 degrees? posted by: Tomasi -- 8/1
2 responses -- 8/3

contact with paper back posted by: chris -- 7/31
4 responses -- 8/1