Your search for personett found 47 documents (of 12642 searched).
1-47 of the 47 results are displayed below.
Knowledge Base Results:
The Importance of G-Code Does a machine operator need to know G-code? Or are modern machines smart so we don't have to be? Opposing sides raise some dust in this thread from the CNC forum. August 30, 2005
Think before you take the CNC plunge WOODWEB technical advisor Brian Personett offers some food for thought to those thinking about purchasing CNC equipment. November 15, 2000
User views on cabinet software Cabinet makers share their opinions and experiences with the major software packages and vendors. September 26, 2000
Exporting CAD Files for a CNC Controller Creating CAD files that a CNC controller will recognize can be a very complex puzzle. Here's one example, with a few lessons learned. June 30, 2007
Fastening countertops How to fasten a laminated particleboard countertop to cabinets. March 28, 2001
P2P Origin Placement Best postitioning for running gables on a point-to-point router. March 14, 2004
"Climb Cutting" and Bit Rotation A basic introduction to bit rotation, feed direction, and the meaning of left-handedness and right-handedness in CNC work, with some tips on controlling cutter rotation and feed direction. February 8, 2008
The Web as a customer interface Shop owners share their ideas on the Internet's usefulness from a marketing and customer service standpoint. September 6, 2000
Small parts on P2P Using a spoilboard to solve problems of no suction with small parts. March 20, 2001
Spreadsheet to G-Code? Yes, there are ways to rig a spreadsheet application to generate simple G-code for controlling CNC equipment. It's an interesting approach, but has practical limitations. May 23, 2007
Switching to metric A discussion of the 32mm system and its attendant need to convert to metric measure. February 13, 2001
Going from handcrafted to CNC Discussion of P2Ps, dedicated boring, edgebanders and other equipment, software and processes. August 29, 2001
Relief for Hurting Feet Long days in the shop are rough on feet. Here, woodworkers share sympathy and suggest practical ways to ease the pain. September 7, 2006
Melamine Chipping and Drill Bit Selection Chipping problems encountered while drilling shelf holes on CNC equipment could be fixed by changing to carbide bits, or could be related to panel quality. March 26, 2009
Passage door construction Techniques and joinery used in the construction of passage doors. January 3, 2001
Doweling on a Point-to-Point CNC CNC routers can be tweaked for accurate dowel boring, but a dedicated boring machine is a better way to go. August 8, 2008
Correcting dowel hole runout Finding and correcting the cause of dowel hole runout in CNC-machined parts. November 7, 2000
Diamond tooling on laminate Tool life and feed rates when using diamond tooling to cut laminate. November 7, 2001
P2P Origin Placement