Production Edgebander with Pre-Milling & Corner Rounding
Capacity, 0.4 - 15 mm edge thickness cap., min. panel width 100 mm, panel thickness 10 - 60 mm, min. panel length 150 mm.
Pre-Milling Unit: With jump control & side copying unit for managing warped panels, 2-position infeed fence, digitals readouts.
NC 410 Controller with: Graphic interface on MS-Windows 2000 Professional, 32-bit operating system; high resolution LCD color screen, unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc.
Automatic (2) coil vertical feed magazine for coil material up to 3 mm thickness with automatic changeover.
≈≈ Patented Glue System w/pre-melt, large separated granular hopper for easy filling & high gluing capacity, with roller applicator (reversible);
Pressure Section, (1) large driven pressure roller & (6) pneumatic secondary pressure rollers.
Workstations:
End Trimming: Double motor front & rear linear end trimming unit "IT 46" (0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 15° adjustable.
Pre/Rough Trimming: Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.
Radius/Bevel Trimming: Top & bottom (0.87 HP/0.65 kW - 12,000 RPM motor ea.), tiltable 0° - 30°, pneumatic exclusion from operator panel.
Corner Rounding: 4-Motor for leading & trailing edges.
Profile Scraping Unit: Top & bottom with collection box.
Flat Glue Scrapers: Top/bottom to remove potential glue squeeze-out.
Buffing Unit: Top/bottom, oscillating/tilting "SZ 30" w/pneumatic exclusion control from control panel & 0.67 HP/0.5 KW- 1,400 RPM motors;
Hot Air Unit: Top/Bottom hot air blowers to reactivate/smooth heavy pvc radiused edges.
*** Please click the link for full description***
Biesse STREAM B Edgebander
