Northtech NT MRS-14N Heavy Duty Multi-Blade Rip Saw (14 Blade)
This is a very popular machine and cost effective. New open ended design allows for you to cut wide material up to 27-1/8" wide. Plus spare arbors, lasers, and the optional quick locking, easy to adjust infeed will not break the bank.
The Northtech heavy-duty 50 HP multi-rip (gang-rip) saw with 15″ maximum blade diameter quickly and accurately cuts material up to 4-15/16″ thick and 27-1/8 wide. Cutting both sides of your blanks at once provides incredible parallelism, reducing required moulder allowance, and increasing your yield. Laser guides (one included) and an optional 103 fence make proper alignment of even the longest material simple and precise. Variable feed speeds of 25 120 FPM and powered height adjustment further improve operator efficiency.
Features:
* Shown with OPTIONAL Infeed Table
Close link chain vs. open (no dust or pinch point)
Oiler has twice the number of lube points (critical)
The VS adjustment location on the 14N.
Can cut up to 4 15/16″ with 14″ blade vs. the MRS-12 12″ blade 3-15/16.
* Can run 12″ as well on the MRS-14N*
Bottom kickback fingers for added safety
Saws, with proper tooling and material, can glue line
* Include one laser and bracket
* Include (1) carbide blades: 12″ x 30T x 70mm x 3.5mm kerf
(1) Toolbox
Warranty is one-year parts
All machines are tested stateside prior to shipment providing trouble-free start-up.
Specifications:
Main Motor Hp. = 50 Hp.
Voltage/ Freq. = 230460 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 70/35 Amps
Feed Hp. = 2 Speed 1.5 / 3 Hp.
Feed System = Feed Chain
Feed Speed = 25 120 FPM
Variable Speed = Variable Speed Pulley
Elevation Hp. = 1/4 Hp.
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Jack Screw / Linear Guides
Total Hp. = 53.25 Hp.
Electronics = CE Approved Components
Dual Voltage = Elevation Arbor Motors
Control Voltage = 110 Volt
Assisted Start = Wye-Delta
Pass-Line = 33-1/2
Min. Length = 17-3/4
Min. Width = 1/2
Max. Width = 27-1/8
Min. Thickness = 5/16
Max. Thickness = 4-15/16
Arbor Rpm = 3570 Rpm
Blade Size = 12 Tungsten Carbide Tipped
No. of Teeth = 36 Tooth
Blade Kerf = 3.5 mm
Cleaning System = Brush on Chain
Vertical Travel = 3/8 5
Dust Collection = (2) 6 @ 1962 CFM
Arbor Diameter = 70 mm
Hold Down Style = Pressure Plate
Kickback Finger = (2) Top (1) Bottom Sets
Emergency Stop = Push Button
Rear E Stop = Push Button
Safety Feature = Safety Interlock Switch
Guarding = Full Cabinet Enclosure
Oiler = Automatic Mechanical Oiler
Low Oil Warning = Low Oil Shut-off
Fence Type = Adjustable
Fence Dims. = 103 Length
Frame Const. = 5/16 Steel Construction
Worktable Dims. = 27-1/8 x 64
Infeed Table = 13-3/4 x 103
Laser = 100mw Laser Light & Mount Bracket
Decible Rating = 74 dB
Net Weight = 4402 Lbs.
Gross Weight = 4694 Lbs.
Machine Dims. = 67 x 58 x 71
Packaging Dims = 72 x 65 x 77
Link to more images and info at 360
