All Listings Gallery Guidelines

FRANKENSAW

Listing #114   Listed on: 01/12/2014

Company Name: FTC

Contact Name:   Alex G
Website:   www.finishingtouchcarpentry.com
Needed to circular saw about 10,000 bd/ft
of KD reclaimed white oak resaw 1 x 16.
This is what we came up with.
10 hp Baldor 3 ph, twin belt, 2" solid steel drive line, 40" sawmill blade with a swedged tooth or two,
Steff 4 wheel feeder.
Can create C/S texture on 17" tall boards
easily.
(No images available for this Shopbuilt Equipment listing.)
Viewer Comments:


Posted By: jim simpkins     [01/29/2014]
would love to build one also, I have access to large timber and would love to be able to saw it.


Posted By: Larry     [02/13/2014]
I'm surprised 10hp is enough. I've got 20hp on a factory made horizontal bandsaw that only cuts 8.5"


Posted By: Alex     [02/13/2014]
Keep in mind this saw was designed for texturing only.
We re sawed the beams on woodmizer 1st.
I take off no more than i/8" per pass with the frankensaw.
This is half the blade kerf.
However I have resawn piles of 2 x 6 soft woods with it, no issues.
We also have a 7.5hp vertical band saw, i can run 8" all day through it. Provide d blade is sharp and feed rate is slowwww.


Add your comment (* denotes required fields):
* Your Name:
* Your Email:
  * Enter your comment below:
*Enter the correct numbers into the field below:
  I have read WOODWEB's Site User Agreement
  (Submitted comments may be edited for clarity)

Date of your Birth: