Basics of Furniture Distressing

      A quick rundown on how to make new furniture look run down. April 16, 2010

I have been playing around with various antiquing and distressing techniques. I am mainly interested in distressing (cracks, nicks, gouges, scratches, etc.) but also antiquing (layering, burn throughs, crackles, etc.). I'm looking for new methods that look authentic.

Forum Responses
(Finishing Forum)
From contributor R:
If you have a Goodwill or a Salvation Army in your area, you can pick up some pretty beat up furniture for next to nothing. Beat up furniture usually has a whole lot of natural distressing and this will give you some idea on the 5 W's. It's so easy to overdo distressing - it ends up looking bad.

From contributor D:
Distressing with a chain-distress tool:

Cowtail brush:

Rasp and file denting:

Wood splits and V-grooves:

Worm hole distressing tool:

For the finishing business, there are three overlapping ways of achieving this look:

There's the manufacturer's approach to mass producing "antique" looks on their retail furniture suites. Check out the websites and the retail locations to familiarize yourself with what's on the market. Many customers have already done this and they're looking to you to give them what they've already seen, already want and already expect.

There's that certain class of wood finishing that designers and decorators are looking for. You have to meet the level of expectation of these decorators and designers.

Then there's the art and deceit of reproducing and/or faking that aged look and making it look as authentic as possible. Ethics aside, tackle each project on its own merits using your own sense of integrity and morals. Do it or walk from it, but don't reveal your red suit and devil's horns and don't brag about your halo and white-feathered wings growing out of your back. But the techniques used here are art.

From contributor M:
"The Art of the Painted Finish for Furniture and Decoration" by Isabel O'neil is a great book to start with.

From the original questioner:
Thanks for the help. I will continue to do my homework. After 12 years in this business, I know one thing to be fact - finishes separate the good shops from the best shops. Happy New Year to all, may 2010 be great!

From contributor T:
Regardless of the techniques you use, the most important aspect of distressing a piece is the sense of history that you create. Imagine where the piece used to live, who used it and how, if a pet constantly use a particular leg for a scratch post, if one side is worn because it was next to a traffic zone in the room, etc. One you write the history, the wear and distress you impart will make sense. If not, it will never look right.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Finishing

  • KnowledgeBase: Finishing: General Wood Finishing

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2018 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article