CNC Modification: Remote Control Cooling
Informative video: a CNC owner adds an air blasting hose and nozzle with remote control to his equipment. September 25, 2014
I had an air blasting nose added to my CNC that may be of interest to some of you.
|If you are seeing this message, your version of flash needs to be upgraded to view this video.|
Click here to get the latest version of the Flash player.
From contributor T:
Great job. You never cease to amaze me with your ingenuity. The sub impeller was really cool as well.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Computerization: CNC Machinery and Techniques
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2019 - WOODWEB ® Inc.