Chemically "aging" cherry
Tips and cautions for using chemicals to quickly achieve the richer colors certain woods attain with age. 1998.
by Professor Gene Wengert
Q.
Is there a chemical method that can be used to obtain the dark red color cherry gets with age?
A.
Joanie Cunningham writes that she ages cherry using Draino. Cherry and a few other species will change color when exposed to strong acids or bases. Another way to age cherry, teak, and walnut is to apply liquid ammonia as an oxidizer. (Check the cleaning section of the grocery store). At the same time, be careful--in addition to risks of applying chemicals themselves, the wood surface has a different make-up. Don't use it where kids might suck the wood. Also, the change in acidity can affect the curing rate of certain finishes. In years past, oxalic acid was used very often as a color modifier.
And one last thought: When plastering around cherry and other woods, the wood must be protected from splashes. Otherwise, a little lye from the plaster and you will have a very red splotch on the wood that won't wash off!
Professor Gene Wengert is Extension Specialist in Wood Processing at the Department of Forestry, University of Wisconsin-Madison.
Click on Wood Doctor Archives to peruse past answers.
If you would like to obtain a copy of "The Wood Doctor's Rx", visit the Wood Education and Resource Center Web site for more information.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Finishing: General Wood Finishing
KnowledgeBase: Wood Engineering: Wood Properties
KnowledgeBase: Woodworking Miscellaneous: Woodworking
KnowledgeBase: Knowledge Base
Would you like to add information to this article? ...
Click Here
If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to review our Forum Guidelines.
Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.
When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.
Return to beginning of article.
|
