Multiple Cabinet Refacing
Can you reface over existing refacing? Yes, if the first layer still adheres well. December 30, 2007
We need to do a kitchen refacing. This kitchen was refaced about 6 years ago with 1/8" plywood on face and sides that is still in good condition and bonded on the frame. No delaminating issues. Can we reface over the existing, or should we remove the existing layer?
(Laminate and Solid Surface Forum)
From contributor D:
You should be able to reface these cabinets without removing the previous refacing.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Cabinetmaking: Installation
KnowledgeBase: Laminates and Solid Surfacing
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2019 - WOODWEB ® Inc.