Pricing for Built-In Shelf and Media Center Units
Cabinetmakers consider how materials, finishes, and installation may affect the value of a representative built-in unit. April 11, 2008
I've got an issue with pricing this unit. It is about 14' across with 24" side units. It has pocket door slides for four doors and will be built from poplar lumber and birch plywood with a white cab acrylic finish. This is the drawing I did for the lady and she loves it. What's it worth in the high class district of Indianapolis?
Click here for higher quality, full size image
(Furniture Making Forum)
From contributor R:
I would charge approximately 10K CDN made from super-refined MDF finished with BeckerAcroma Matador Lacquer finish. Using wood I would charge more than 10K.
Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?
Have you reviewed the related Knowledge Base areas below?
KnowledgeBase: Knowledge Base
KnowledgeBase: Cabinetmaking: Installation
All rights reserved. No part of this publication may be reproduced in
any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.
335 Bedell Road
Montrose, PA 18801
Copyright © 1996-2019 - WOODWEB ® Inc.