Sawing Ash with Emerald Ash Borer

      There are restrictions on the transport of infested wood. Mill hygeine may be a good idea too. May 20, 2011

I'm a hobby sawyer in Indiana that cuts timber from our own property for my own woodworking. A friend five miles away says he needs to cut down several ash trees because the EAB has killed them. My mill is portable - I could take it to his property and cut then bring the lumber back to my home. Since the EAB is in the outer-most layer of the tree it seems possible to cut away the bad and keep the good. Is it worth the trouble/risk?

Forum Responses
(Sawing and Drying Forum)
From contributor L:
Assuming the ash wood is still sound, your method sounds good to me. The EAB is under the bark in the cambium layer. Remove the bark and smash any green bugs you see.

From Gene Wengert, forum technical advisor:
Are you both in the quarantine zone? It is possible that your mill, after sawing, will have some debris on it that could include the EAB. Perhaps most important is to check with Indiana and see what the guidelines or the law is in that state. Some states restrict the movement of ash wood.

From the original questioner:
Gene - good point, thanks. I called Indiana DNR and they said our area is quarantined, so I can cut and use the lumber myself but can't take it outside our county. I haven't committed to doing this job, but if I do I'll take extra care to get rid of debris and any insects.

From contributor J:
A leaf blower is part of my regular portable milling equipment collection. One needs to blow out around the battery and blade housings every couple hours anyway. At the end of the day go over your mill thoroughly. You have to know where debris accumulates. On my LT-40 stuff can get in the main tube which can be blown out by removing the tail end cap and the hydraulic box cover for example. Not that I do this area every time, but certainly if sawing ash somewhere I would. I'm worried that someday there's going to be an impact on moving a mill, not just the wood, from these pest problems.

Would you like to add information to this article?
Interested in writing or submitting an article?
Have a question about this article?

Have you reviewed the related Knowledge Base areas below?
  • KnowledgeBase: Knowledge Base

  • KnowledgeBase: Primary Processing

  • KnowledgeBase: Primary Processing: Sawmilling

    Would you like to add information to this article? ... Click Here

    If you have a question regarding a Knowledge Base article, your best chance at uncovering an answer is to search the entire Knowledge Base for related articles or to post your question at the appropriate WOODWEB Forum. Before posting your message, be sure to
    review our Forum Guidelines.

    Questions entered in the Knowledge Base Article comment form will not generate responses! A list of WOODWEB Forums can be found at WOODWEB's Site Map.

    When you post your question at the Forum, be sure to include references to the Knowledge Base article that inspired your question. The more information you provide with your question, the better your chances are of receiving responses.

    Return to beginning of article.

    Refer a Friend || Read This Important Information || Site Map || Privacy Policy || Site User Agreement

    Letters, questions or comments? E-Mail us and let us know what you think. Be sure to review our Frequently Asked Questions page.

    Contact us to discuss advertising or to report problems with this site.

    To report a problem, send an e-mail to our Webmaster

    Copyright © 1996-2019 - WOODWEB ® Inc.
    All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
    Review WOODWEB's Copyright Policy.

    The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.

    WOODWEB, Inc.
    335 Bedell Road
    Montrose, PA 18801

    Contact WOODWEB

  • WOODWEB - the leading resource for professional woodworkers

      Home » Knowledge Base » Knowledge Base Article