WOODWEB - the leading resource for professional woodworkers


 Home » Choose Forums to Display » Most Recent Posts
 


Forums      Return to Previous Page || Return to the page you were originally viewing



Adhesives Forum

  • Heat and UF glue times   (5/24)

  • High Heat   (4/28)

  • Glues for Wood Veneer lamination in hot press   (4/24)

  • PUR edge banding adhesives   (3/31)

  • P2-10   (2/11)

  • masking tape residues on veneer and marketry issues   (2/9)

  • glue for dowel insert machine and case clamp assembly   (1/26)

  • Titebond 2 is NOT water resistant as claimed   (1/15)

  • Adhesive Application on Pressed Wood   (1/14)

  • Contact adhesive and cracking lacquer - please help!   (1/13)




  • Architectural Woodworking Forum

  • Reverse Table Saw   (7/20)

  • True Divided 60 Lite Sash   (7/18)

  • wood block flooring   (7/14)

  • Decorative wood inserts   (7/7)

  • How much did I under bid   (6/29)

  • Tangent Handrail   (6/28)

  • Sliding Door Track for a Radiused Door   (6/27)

  • Bedding glass in water cutoff?   (6/17)

  • Need Long Pattern Bit   (6/14)

  • panels   (6/13)




  • Business Forum

  • Low hanging fruit   (7/16)

  • Going to AWFS?   (7/12)

  • Full payment   (7/8)

  • Customer Decision Making 101   (7/6)

  • software extortion   (7/6)

  • When performance starts to sour   (7/5)

  • Chordal's Letters Preface   (7/1)

  • Interesting Read   (6/24)

  • Presented without further comment   (6/18)

  • Dowel laminated timber   (6/16)




  • Cabinetmaking

  • cutting L shaped shelves for closets   (7/19)

  • outdoor cabinets   (7/16)

  • Processing on a vertical panel saw   (7/14)

  • redwood wine barrel wood   (7/13)

  • Curved and angled seat back   (7/13)

  • Wilsonart 30 wood glue   (7/12)

  • Salice hinge question   (7/11)

  • Entry Level Edgebander   (7/10)

  • Heat VS glue   (7/7)

  • Chiseling corners in MDF shaker door   (7/4)




  • Forums: CAD

  • Cut Rite question   (7/12)

  • Woodwork for Invenror   (7/10)

  • Alphacam Alternatives   (7/3)

  • AlphaCam V7.5   (6/25)

  • Automatic Pod & Rail Positioning   (6/23)

  • iPad app for drafting on iPad Pro   (6/18)

  • VBA Alphacam   (6/17)

  • Drop in orders?   (6/11)

  • Cabinet Vision Processing Speed   (6/7)

  • Autocabinets   (6/3)




  • Forums: CNC

  • cutting 1 inch material   (7/15)

  • Biesseworks Optimizing   (7/12)

  • Need help with gcode!   (7/9)

  • Fanuc Anderson   (7/2)

  • Fitting Size   (7/1)

  • limtech cnc   (6/19)

  • CNC for wood sculpting   (6/16)

  • Busellato CNC Code   (6/12)

  • Morbidelli Universal 3012 TV Aspan setup.   (6/12)

  • Mayer Saw running Ardis Optimizer   (6/10)




  • Forums: Commercial Kiln Drying Forum

  • Sap Stain In Cypress   (2/28)

  • sample ovens   (2/8)

  • End coating   (2/8)

  • High moisture developing in back of kiln dryer   (1/6)

  • Kiln Drying workshop - Jan 9-12, 2017   (12/14)

  • Confined Space   (12/6)

  • R/Q   (11/24)

  • Looking for Cypress Drying Schedule   (7/27)

  • Powder Post Beetles   (4/27)

  • Kiln Drying Workshop - Jan 11-14, 2016   (12/4)




  • Forums: Dust Collection, Safety and Plant Operation

  • Cleaner Air   (7/7)

  • Dust capture for a line boring machine   (6/28)

  • Cleaning return air   (6/26)

  • woodshop wring class II??   (6/21)

  • replacing dust collector bottom bags with barrels   (6/20)

  • dedicated dust collector for brandt KFC-53c bander   (6/15)

  • Dust Collector Sucking up conveyor belt   (6/6)

  • Identify Machine Part   (6/6)

  • Quick connects   (6/2)

  • Blade Dust Collection   (5/14)




  • Forums: Finishing Forum

  • Flat painted plywood doors   (7/18)

  • Refinish ideas for light oak?   (7/15)

  • hvlp   (7/6)

  • Help! - Spilled cv   (7/6)

  • waterborne on one piece shaker   (7/4)

  • AAA fluid hose diameter   (7/4)

  • What are they called   (7/3)

  • Pinks Spots on Painted Cabinetry   (7/3)

  • White streaks in Shellac   (6/29)

  • Mixing   (6/28)




  • Forums: Forestry

  • I've had the hardest time trying to sell these walnut logs...   (6/1)

  • best way to paint trees for a first SYP plantation thin   (3/27)

  • can I ask for advice on buying a dependable 4wd truck to use in the woods   (3/17)

  • Douglas Fir Logs   (1/5)

  • Are PT chemicals toxic to living trees?   (3/24)

  • NW Arkansas Red Cedar stump prices   (11/9)

  • Wood Guangzhou 2016   (8/28)

  • Reclaimed timbers   (8/21)

  • WOODWEB Poll: How's Business?   (3/4)

  • firewood slabs   (11/10)




  • Forums: Furniture Making Forum

  • Jwl-1236 lathe issue   (6/27)

  • CNC routing services near Woodland Hills CA   (6/17)

  • Product idea - advice needed   (6/16)

  • gluing slab tables   (6/13)

  • help finding a hinge   (6/1)

  • Pm shapers and feeders   (5/19)

  • What Pine Species?   (3/30)

  • Ash   (3/24)

  • School of Wood Carving   (3/22)

  • Interior door veneer splitting   (3/16)




  • Forums: Cabinet and Millwork Installation Forum

  • Prefinished butt joints and joinery for large bench   (7/12)

  • making my own cabinet jack   (6/22)

  • Recommended installers in NYC   (6/20)

  • Library Bookcase with Swing Out Cabinet   (5/31)

  • Richlite Countertop   (5/26)

  • Hiring   (4/21)

  • How crooked is to too much   (4/8)

  • Kitchen Cabinets   (4/6)

  • any1 else have customers sign installation checklist? like a disclaimer ?   (4/4)

  • Cabinet installation   (2/18)




  • Forums: Laminating and Solid Surfacing Forum

  • Large Corian Sander   (6/28)

  • Corian no-drip edge sticks   (6/15)

  • laminating white oak onto MDF substrate   (5/20)

  • zipper vacuum bags   (4/5)

  • Holzher Edge Bander   (2/27)

  • Quartz touchup coloring   (2/26)

  • ARPA laminate issues   (2/23)

  • Large Desk Top Construction   (2/18)

  • solid surface edge finishing   (1/26)

  • Problems with Wilsonart 1730 contact adhesive   (1/19)




  • Forums: Sawing and Drying Forum

  • Japanese? Elm   (7/13)

  • Drying Black Spruce dead straight   (7/11)

  • drying wood in a hot box   (6/27)

  • inaccurate miter cuts DW718   (6/24)

  • milling spalted maple and pecan   (6/19)

  • advice and sawing and drying   (6/17)

  • Guides for double edge bandsaw blades   (6/10)

  • Guess what caused this marking on walnut   (6/7)

  • PEG 300 vs. PEG 1000   (6/6)

  • drying pine   (6/1)




  • Forums: Solid Wood Machining Forum

  • Wanted contact drum for Ramco sander   (7/11)

  • Making Rounded Coffin Top   (7/5)

  • Maxym CNC problems   (6/28)

  • Closet system fabrication   (6/3)

  • KANEFUSA Spiral Knives   (5/31)

  • Brand new Steff feeder getting hot   (5/19)

  • Dovetail Machines....   (5/16)

  • Wide-belt sanders for small pieces?   (5/4)

  • Weinig Powermat   (4/27)

  • SCM Jointer   (4/27)




  • Forums: Value Added Wood Products

  • Urban Wood, Anyone   (1/21)

  • Urban Wood   (6/8)

  • WOODWEB Poll: How's Business?   (3/4)

  • Shop Poll: What Size Is Your Shop?   (2/5)

  • Looking For A Wood Products Manufacturer   (8/25)

  • How Sawdust Pellet Machine Makes Quality Sawdust Pellets?   (5/21)

  • Burning sawdust in a pellet stove   (4/22)

  • Small start up needs help with rescued / reclaimed wood   (7/30)

  • Reclaimed lumber   (11/5)

  • cedar oils   (4/15)




  • Forums: Veneer

  • Quarter sawn grain wrap   (7/17)

  • Long veneee layup   (6/30)

  • Trying to veneer a mini fridge   (6/13)

  • applying veneer to safe room door   (4/26)

  • Veneer Moisture Meter   (3/30)

  • Ebony inlay in maple - how to keep the black dust out   (3/2)

  • Veneer and contact adhesive   (1/12)

  • aluminum or steel   (12/27)

  • Tineo veneer match   (11/24)

  • What veneer is this?   (11/20)




  • Forums: WOODnetWORK

  • Holzma rear load panel saw   (6/28)

  • Panel saw technician needed   (6/28)

  • Ott Mark 2 3 Edgebander assistance   (6/8)

  • SAC SUERI 25" Wide Belt Sander   (5/20)

  • Finishing choices for a sappy slab of fir   (5/11)

  • Pole Barn vs. Steel Building for Woodshop   (4/26)

  • Planer slipping out of gear   (4/2)

  • An old fiddle maker   (2/13)

  • Basement gym on wood floating floor   (1/29)

  • Old School Planer   (1/22)




  • Exchanges      Return to Previous Page || Return to the page you were originally viewing



    Classified Ads

  • Enroute for sale (NY)   (7/19)

  • Alphacam full version (NY)   (7/19)

  • Complete Millwork / Woodworking Shop for rent, Bronx: Daily/Weekly/Monthly (NY)   (7/17)

  • Cabinet vision software with plugs (FL)   (7/12)

  • DMC Software (CO)   (7/07)

  • 14,000 sq ft of burls and exotic veneers (CA)   (7/03)

  • Freeborn Tool Co. PC-11-041 8piece carbide coping & sticking set (MD)   (7/03)

  • 5000 sq ft turn-key ground floor woodshop for sale in Brooklyn (NY)   (6/27)

  • Looking for Cabinetware (KS)   (6/26)

  • Entire Product Portfolio for sale (Canada: Alberta)   (6/25)




  • Job Opportunities and Services

  • Finish and Coatings Tech Wood Product Manufacturing (TX)   (7/20)

  • Technical Detailer Exhibits Manufacturing (NY)   (7/20)

  • **EXPERIENCED OR ENTRY LEVEL** Cabinet Maker/Machine Operator (NJ)   (7/20)

  • FINISH PERSON (MA)   (7/20)

  • Cabinetmaker/Apprentice (IL)   (7/19)

  • Experienced Cabinet Maker (FL)   (7/19)

  • Draftsman (FL)   (7/19)

  • Purchasing Manager - Comm Cabs/Arch Millwork (MN)   (7/19)

  • (New email) Supervisor or Production Manager (Anywhere)   (7/19)

  • Moulder Operator (VA)   (7/19)




  • Lumber Exchange

  • 8/4 KD Live Edge Eucalyptus (FL)   (7/20)

  • Chestnut Siding (IL)   (7/20)

  • T/Ls Poplar Lumber Green Rough 4/4,6/4,8/4 #2Com/Btr (VA)   (7/20)

  • Poplar Cants and Timbers to Order (MD)   (7/20)

  • 1 x 10" Poplar Barn Siding (MD)   (7/20)

  • 9/4" Elm Burl Slabs / Table Tops. (OH)   (7/20)

  • Rusty Barn Tin (NC)   (7/19)

  • # 1 Grade Reclaimed Heart Pine Joist. (NC)   (7/19)

  • Reclaimed Heart Pine Joist (NC)   (7/19)

  • Antique Heart Pine Decking (NC)   (7/19)




  • Machinery Exchange

  • Hasko - High Speed End Matcher (MO)   (7/20)

  • **AWFS SPECIAL** Barth Multi-Press and Lift Tables @ Rangate (WA)   (7/20)

  • Brandt Ambition 1210 Edgebander (NC)   (7/20)

  • Shaw Almex membrane press (NC)   (7/20)

  • Weigh U23E 6 head molder (MI)   (7/20)

  • Weinig Hydromat 23C (MO)   (7/20)

  • Looking for outfeed fence (KS)   (7/20)

  • 125 d single end tenoner (TX)   (7/20)

  • Schelling America FM-430 Panel Saw (NC)   (7/20)

  • 1996 maka stv160 (TX)   (7/20)




  • Project Gallery / Sawmill Gallery / Shop Gallery      Return to Previous Page || Return to the page you were originally viewing



    Galleries: Project

  • Fire Logo Table   (7/17)

  • Tables   (7/17)

  • MY ALPHACAM PROYECTS   (7/13)

  • MY ALPHACAM PROYECTS   (7/13)

  • Walnut Copper River Bridge Table   (7/05)

  • Rustic chairs made of Taiwan Cedar   (7/04)

  • Live Edge Bubinga Slab Island   (7/01)

  • Custom Walnut Home Office   (6/20)

  • Timber / Beam Planer   (6/18)

  • Football Helmet   (6/08)




  • Galleries: Sawmill

  • Aqua Quest International   (06/07)

  • Mccay logging and sawmilling   (05/27)

  • Riephoff Sawmill   (04/26)

  • Hewn   (12/27)

  • Southern Indiana Sawmill   (11/17)

  • Berdoll Sawmill & Furniture Co.   (10/14)

  • Pacific Rim Trading Co.   (08/20)

  • Wassaw Enterprises   (08/05)

  • Silver Leaf Sawmill   (06/01)

  • T.S.M. Farms   (02/28)




  • Galleries: Shop

  • Full Circle Design Works, Inc.   (07/10)

  • Hewn   (01/04)

  • Antreasian Design, Inc.   (10/13)

  • Lumber One   (08/18)

  • Parts Cutter CNC   (08/03)

  • Closet Masters of Nevada   (12/04)

  • Southwind Millwork   (05/22)

  • Northshore Finishing   (03/03)

  • David Thiessen Woodworker LLC   (11/02)

  • R J Hoppe Inc.   (02/18)




  • Industry News / Auctions, Sales and Special Offers      Return to Previous Page || Return to the page you were originally viewing



    Industry News

  • Vero Software to Exhibit Alphacam, Cabinet Vision and New WorkPlan at AWFS   (7/7)

  • CIM-Tech Debuts Router-CIM 2018 at AWFS Las Vegas   (7/7)

  • Cabinet Vision, by Vero Software, at SCM West Coast Open House June 21   (6/17)

  • New Distributor for Alphacam - Farnese North America   (6/17)

  • Mastercam 2017 Summer Teacher Training - Boost Your Mastercam Skills   (6/17)

  • Latest Housing Report by the USDA, Part 2, Now Available   (6/15)

  • Latest Housing Report by the USDA, Part 1, Now Available   (6/15)

  • KCD Software - Visit at Booth 4446 at AWFS   (6/11)

  • Cabinet Vision by Vero Software Honors Top Customer Service Representatives   (5/24)

  • BENZ Inc. Introduces Flex 5 and Flex 5 Plus Adjustable Angle Heads   (5/24)




  • Auctions, Sales and Special Offers

  • Live and Online Auction-June 22-Modular Home Builder   (5/31)

  • Online Auction 6/1- Haworth: (2) Cefla/ Sorbini Pass Through Finishing Lines & More   (5/16)

  • Online Auction - Maryland Millworks & Specialties   (1/4)

  • EnRoute Subscription Promotion   (8/3)

  • HD and HDS CNC Router Models Ready to Go - from Techno CNC Systems   (12/8)

  • WOODWEB Power Feeder Special from Shop Gear Inc.   (11/6)