Woodworking Business

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Encouragement

2/19/16       
Riley

Now going on 6 years since I started building residential custom cabinets. 4 employees in addition to myself. Seems to be a constant struggle to produce sufficient income. Can anyone share at what point in the game things start to level out and flow better ? Or is this a career that will never produce a high level of income ?

2/19/16       #2: Encouragement ...
rich c.

"B" in my experience. (never making a high level of income) But I was raised on a small family farm, so it was natural to not be driven to make a lot of money. Job satisfaction, yes, income no. I made a decision to close my shop in 1999. Made a nice living, but not great in 8 years of business. I got a great corporate job as a model maker, so have retired with a modest pension. It's enough, and that was the way I was raised.

2/19/16       #3: Encouragement ...
Joel

Everybody and their brother make residential cabinets. Most larger shops around here move into commercial when they want to grow and make money.

2/19/16       #4: Encouragement ...
Family Man

From experience it is tough to make a nice income with that size of shop. It's too big of "a monster" that it must be fed with overhead and big enough you have to keep work coming through the doors that you knock off a few percent here or there to make sure you get the job.

But it's too small to take advantage of the overhead. Not large enough to have a fulltime salesman and marketing budget.

You are stuck in no man's land.

Other than that, it largely depends on your region, quality level, who you build for and a million other variables that without knowledge of any advice you receive could do more damage than good.

Good luck-

2/20/16       #5: Encouragement ...
Joe

It is possible. I think it took about three years for us once we started working on the business rather than for it. The key for us was diversification and process. Know exactly how long every aspect of your process takes. Avoid the things you don't profit from and never stop improving your money making areas.

2/20/16       #6: Encouragement ...
Mitch Suber  Member

Website: subercustomshutters.com

After 25 years in woodworking, I cant say that I am even now satisfied with my level of income. I am, however, very optimistic about my future. After realizing, some years back, that it is just flat out difficult to grow a small business and grow profits while doing so. I got really large for awhile, and it seemed we did do a lot more volume, but I worked a lot of long hours, for only a small increase in salary. I took the volume back down, trimmed away at expense and waste, and I started making better profits. But the smaller volume seemed to cap my maximum. The reasoning behind my optimism, is mostly due to one thing. We began selling products made by other companies. I still keep my shop busy, and we build all of our wood products. But I can also order a house full of blinds for a customer, buy them from a supplier and make a profit almost equal to what it might take us two weeks to build in our shop. The outside product may require me a 1/2 day to measure, a full day to install. Keep in mind, the blinds bringing in a profit almost equal to what our shop can return, the shop product requiring about 10 to 14 days of man hours. By using the production abilities of my suppliers, I find I can really boost my volume of sales, boost my profits, with minimal impact on my overhead, and I don't have to hire more help with the first levels of increase. I actually can see where we will be hiring another salesperson for these products, plus an additional installer. Pretty much all funded by the sales of these new products. It seems you could look to other products for a solution.

2/20/16       #7: Encouragement ...
cabinetmaker

I am seriously happy with my level of income, but it did take a few years. I agree with exactly what Joe said:

"It is possible. I think it took about three years for us once we started working on the business rather than for it. The key for us was diversification and process. Know exactly how long every aspect of your process takes. Avoid the things you don't profit from and never stop improving your money making areas."

We are diverse too. P-Lam casework, p-lam tops, Corian tops, granite, quartz, solid wood cabinets, all of it. From fabrication to installation. Not everyone wants this, but it works for us.

I had mentioned writing up you numbers
on purchases and estimates/jobs in another post and others commented that the numbers had to be tracked after the fact- well, yes they do, but only to make sure what you planned turned out well or use the info to improve your planning and execution.

When you look @ Financial Statement, really look @ it and if you don't understand it, get some help. What ares can you improve ?

Look @ your schedule- how much does it produce ? Cash flow wise ? Do all the jobs you work on produce a profit and is there something left over at the end of every job to carry the shop, or are you waiting on a deposit ? This is all crucial information and it needs careful examination and consideration.

Looking at the shop is it clean and organized ? Is it organized ? Do the employees have all they need ? NOTE: most employees will work with what is set up. Efficient or not, they will generally plod along with whatever is given.

As the owner, you need to be meeting clients, delegating work and making sure it is getting done in 8 hours a day, if it is not, time to make adjustments. You need to be writing orders and sales.

Seriously, work on the business. Ignore negative people and move forward

2/23/16       #8: Encouragement ...
Leland Thomasset  Member

Website: taghkanic@comcast.net

Riley
I agree my business really made a change for the better fiscally once I got serious about running my business and not doing it all. Diversification and Automation have played a large roll in our success. I also attend as many conferences and industry trade show as possible and try to learn how others have made the transition. The CMA Cabinet Makers Association has done some great seminars and local events teaching what others have already learned. I have link attached here to a great program on pricing and profitability. It is worth a look.
http://www.cabinetmakers.org/news/the-art-of-pricing-profitably


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)