dedicated dust collector for brandt KFC-53c bander
6/15/17
Website: http://morantzcabinets.com
Just bought this large bander that has premill. Want to get a dedicated dust collector due to the premill. Will a 2hp cyclone be just as good as a 2bag 2hp floor model? There is a big difference in price. Any opinions? Thanks, Harold.
6/19/17 #2: dedicated dust collector for brandt ...
What is the diameter of the duct pickup on the premill?
6/19/17 #4: dedicated dust collector for brandt ...
The advantage of a good cyclone is that most of the dust never reaches the filter.
I imagine if the dust collection is not good "bad things happen". You just invested in pre mill to improve quality, I would spend the money on the best collector to go with it. It is not significant relative to the cost of the bander or the cost of rework over time.
6/19/17 #5: dedicated dust collector for brandt ...
take a look at oneida air systems
https://www.oneida-air.com
6/19/17 #6: dedicated dust collector for brandt ...
Website: http://morantzcabinets.com
Have a jet 3hp cyclone arriving soon. It will be more than sufficient for the job. Custom manifold with 35degree branches will hang above machine and go directly into the cyclone.
6/27/17 #8: dedicated dust collector for brandt ...
Website: http://www.industrialaxialfan.com
Recommend a website that has what you want www.industrialaxialfan.com mixed flow fans
http://www.industrialaxialfan.com/
6/28/17 #9: dedicated dust collector for brandt ...
Harbor frieght $179 on sale , works great. We checked no dust gets past to the gluing station.Have it on a Wall switch.Took a trip or 2 to H.D.To get the PVC right. Got a copper ground wire running in it. Was going to be 500 bucks+ for a custom manifold. We run about 2-3 rolls a week.5-9 hrs+-. Empty the bag off a forklift platform every other week when 1/2 full. Hope to eventually getting around to putty a dust deputy on it...
View higher quality, full size image (1080 X 1920)
View higher quality, full size image (1080 X 1920)