|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Edgebander glueline issue5/10
My edgebander is leaving an inconsistent glue Line which appears almost like a dotted line as you can hopefully see in this attached photo it's more noticeable on one millimeter banding then it is on thin wood or pvc tape .I would appreciate any suggestions on what adjustments to try to eliminate this situation.
Click the link below to download the file included with this post.
A few things come to mind:
Be careful to not have too much pressure on the pressure rollers, hence squeezing out too much
I would recommend cleaning the auger/spreader and do some tape tests