|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Biesse Spark 3.32/7
Trying to start up a used Biesse Spark 3.3
Can anyone tell me what Out1 or AL1 is on control panel?
Would love a PDF manual.
Post a few pics of your controller
Here are the pics:
That looks like a fairly new bander there. If you bought that used, it was certainly well cared for.
Biesse has some of the best customer support I've dealt with. I'm certain if you contact them or have a Biesse dealer in your territory, request the manual you can get one from them.
If I’m not mistaken the cabin or access cover panel had to be on lock for you to proceed.
Yes I think the switch needs to be in lock position also. However, that has not changed my results. I did get a schematic from Biesse but they have no trouble shooting manual. This is one of there machines made in China. But it is spotless and just from looking at the insides seems as well made as a Brandt I used to own.
It's probably something simple. May just need a tech to start it up.
Looking at the control panel make me wonder if all the rolling has to be off. Then as you turn on the lower buttons.
VFD. Chain Then the tooling. End trimmer etc.
Both of our banders need to be at temp before anything can operate.