|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
weeke venture vaccume10/13
hello all hope your having a great day
Isnít there a way to disable the low vacuum warning/fault when surfacing the table?
From what I understand from my machine (Vantech 480), if the filename is "_____spoil.mdb" it won't pay attention to the low vacuum warning. That's 5 underscores before "spoil". I found out the hard way because I changed the spoilboard surfacing program's file name and had to call Stiles support. I don't know if it's just the 5 underscores that's needed, or the entire filename. Never experimented afterward. Can you mount your carving blank onto the table and cover the rest of the spoilboard with something so you don't trigger the warning? You could also gasket off a section of the table that you don't want vacuum going to.
thank you for your help
i own a weeke vantage 38 l i could not find any way to do so , i am waiting for the response the company .