|Home » Forums » Cabinet and Millwork Installation » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
counter top divider11/23
Does any one have any good ideas on how to attach a divider to the floor and wall above the counter top with out seeing the attachment hardware. I can use a metal angle under the counter top, but the divider will still move and flex at the floor and at the top.
Click the link below to download the file included with this post.
for fridge end panels i have screwed a lag bolt into the floor and then cut the head off.
Thank you, I'll have to try that.
I have also gone to the basement and ran a screw up through the floor into the bottom of the panel.
I like to run a 1/4" wide dado top & bottom, tall enough to be able to scribe the divider, then attach a piece of 1/4 x 1/4 to the floor or top, and slide it in place from the front. Cheap, easy, invisible.
Thank you Bill