Architectural Woodworking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Putty Glazing

7/27/18       
Gary

I am wondering what might be the best way to accelerate the curing of oil based putty glazing compound after it has been put in place against the glass ?
Would a fan help or maybe setting in direct sun ?
Thank you

7/27/18       #2: Putty Glazing ...
rich c.

Oil based is not made to quickly or completely dry out for quite some time. Here's what DAP says;
The glazing compound may still feel soft after 3 days to 7 days. Accordingly, sash should be operated carefully for approximately three weeks on the average. Glazing may still be damaged if sash is handled carelessly. Full adhesion will develop within one to two months, depending on job conditions

7/28/18       #3: Putty Glazing ...
Gary

Thank you Rich; not sure you actually read my question?

7/28/18       #4: Putty Glazing ...
rich c.

I read it, just trying to explain that you used the wrong product for quick drying. Ain't gonna happen! Glazing putty is meant to be outdoors, why would you think moving it outdoors or putting a fan on it is going to speed it up when the manufacturer tells you it can take one to two months.

7/29/18       #5: Putty Glazing ...
Adam

The primary reason for replacing traditional wood windows with pvc was the glazing.

We liked making the windows. The cost wasn't much different. Painting is kind of a pain but it gives more color options.

However, I still believe its that damn glazing. Tricky to do a decent job. Takes forever to cure. Fingerprints everywhere.

7/29/18       #6: Putty Glazing ...
Gary

One of the purposes of this forum is to share knowledge gained through experience. I was just curious if someone happened upon a method of accelerating the curing time of oil based glazing putty.
Peace/Out

7/29/18       #7: Putty Glazing ...
Joe Calhoon

You might try the OWWM forum.
A few shops there do traditional putty glazing. They always mention a certain brand they like. Cannot remember offhand.

7/29/18       #8: Putty Glazing ...
rich c.

Thanks for explaining the purpose of the forum.

7/29/18       #9: Putty Glazing ...
Jack Cadwell

If you used Dap, the quickest way to make it set up is to buy some Sarco Type M glazing compound (Amazon), rip out the old putty, and glaze it with Sarco. It will be paintable, with no priming, in 36 hours, in shop conditions.

I build putty glazed sash. I have been using Sarco for years. It takes some education to make it work well. John Leeke, at Historic Homeworks, has written a lot about how to glaze with Sarco. I don't need to repeat it all here. Clean up with whiting is great, quicker and better than water.

To answer your question, there is no way to make putties like Dap set up quickly. Heat does help, but too much can soften the putty so that the glass can slide in the opening, causing diagonal ripples on the sides and slumping at the bottom.

I meant it when said rip out the wet stuff and use Sarco, it's quicker and better.

Jack Cadwell

7/29/18       #10: Putty Glazing ...
Gary

Thank you Jack; I always do use Sarco brand.
Thank you for your feedback !

7/30/18       #11: Putty Glazing ...
Jack Cadwell

Gary, If you are using it, the Dual Glaze Sarco putty sets up slower than the Type M.

I haven't run into too much oil in Sarco putty, but in Dap and UGL Gla-Zol there can be too much oil out of the can. To dry it, I roll the putty out like pie crust on very clean corrugated cardboard, the roll the cardboard up. After an hour, it has pulled a lot of oil out. The cardboard has linseed oil in it, and might need to be disposed of like flammable rags. if it's too dry, I add linseed oil back in.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)