Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Edgebanding: Match the doors or match the interior?

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Edgebanding: Match the doors or match the interior?

5/17/20       
Dan Member

Question for the cabinetmakers here that build frameless cabinets. What do you do for edge banding color on the front edge of the boxes?

Most of the places around here seem to band with raw wood and then spray the edge to match the fronts. That seems nuts to me from a labor standpoint. It would seem to make more sense to try to get banding in the color of the front and then just band it and be done with it.

Or, does anyone band to match the interior of the cabinet? (typically pre-finished maple around here). That would seem to be far easier in terms of matching and far less labor cost than trying to match the doors. But nobody I know seems to do it that way. It that a bad idea?

5/17/20       #2: Edgebanding: Match the doors or mat ...
Anonymous

When did what was easiest become the deciding factor of what we do and how we build cabinets? Sure if the end result is the same but you aren’t asking that. You’re a custom cabinetmaker charging custom cabinet prices. Build a damn custom cabinet already!

5/17/20       #3: Edgebanding: Match the doors or mat ...
Leo G Member

I match the door because that's they way it should be. You can always prefinish your edgebanding and then apply it if you don't want to mask and spray.

5/17/20       #4: Edgebanding: Match the doors or mat ...
Matt Calnen

Everyone around me does prefinished maple plywood with prefinish maple banding. To me, it looks better than a two tone box. Often with face frame cabinets, we hold the box into the door or drawer opening with 3/8” showing of the banded plywood. To me, that would look real silly if the banding matched the outside of the cabinets. As they say, opinions are like assholes.

5/17/20       #5: Edgebanding: Match the doors or mat ...
Dan Member

I work mostly with solid wood, and don't build a lot of cabinets. So I am asking a logical question to understand why people use the approaches they do.

"Anonymous", I have no problem doing a lot of extra work if there is a good reason for it, but if not, I'll put those hours towards something worthwhile.

"Leo G" can you elaborate on why matching the edge banding to the door is "how it should be". It might be obvious to you, but it is not obvious to me.

5/18/20       #6: Edgebanding: Match the doors or mat ...
TonyF

Dan:

There is a point at which the inside of the cabinet ends and the outside of the cabinet begins. Where the plane of the interior surface terminates is as good a place as any, and as such, if you are doing full overlay frameless cabinets, this old fart thinks that the cabinet banding should match the doors.

Not doing this, at least to me, speaks to a mindset of mass production work rather than custom work, reminding me of dental and medical cabinets.

If it is custom work, then you could always ask the client, designer or architect what their preference is.

TonyF

5/18/20       #7: Edgebanding: Match the doors or mat ...
MarkB Member

Unless not understanding, you can still see the edges of the box in places with frameless so unless the interior and face colors are very close I dont see how you could leave the banding on the boxes a different color I guess unless they were very close. Clear maple interior and a dark face or white interiors you'd still see edge of the box in places?

5/18/20       #8: Edgebanding: Match the doors or mat ...
Leo G Member

It's the way I was taught, so it's right to me. Plus the gap between the door and the front of the cabinet lets you see the front edge which should be the color of the door.

5/18/20       #9: Edgebanding: Match the doors or mat ...
David Egnoski  Member

Website: http://www.richmondcabinet.com

Think of the front edge of a frameless box as the face frame. How would you finish the face frame?

5/18/20       #10: Edgebanding: Match the doors or mat ...
Dan Member

When the cabinet has shelves, do you finish the front edge of the shelves to match the doors also?

5/18/20       #11: Edgebanding: Match the doors or mat ...
David Egnoski  Member

Website: http://www.richmondcabinet.com

I normally finished shelf front edges to match cabinet interior, but the customer has final say.

5/18/20       #12: Edgebanding: Match the doors or mat ...
Matt Calnen

Good point Dan, and one I never thought of. To me, how Polish does it look when the cabinet box has one color banding, and the shelves have another? I’ve never had an issue with seeing the box when the doors and drawer fronts are closed, perhaps some people have less tight tolerances. A 3/32” gap just shows a dark shadow, so if it’s painted white or dark stain walnut, I personally never felt it was an issue. I feel it gives the box more of a solid wood feel, but that’s just my opinion. Good thread.

5/18/20       #13: Edgebanding: Match the doors or mat ...
DJS

We have done many hundreds of homes containing thousands of cabinets over the last 28 years, so on this subject I have the luxury of a large sample set of customer opinions on which to rely. My opinion for many years was maple on maple, and customer non-reaction indicated they agreed. Then at some point there was a change, and customers started to complain. Just one at first, then another and another. So the question then had to be asked. The answers went from being 75/25 in favor of maple to being 75/25 in favor of door color. Now, the standard is door color.

Which brings up an equally important question; PVC or paint? PVC, when an adequate match is available, is unquestionably more durable. But there isn't always an adequate match, so in those cases we send the completed box to finish and they do the mask thing. In our experience, it's simpler than prefinishing the tape or flat stacking panels which both require more time and planning and introduces a deviation to the system which is worse than the additional labor.

Anyway, those are my thoughts on the subject.

DJS

5/18/20       #14: Edgebanding: Match the doors or mat ...
Alan F. Member

NAAWS and AWS for commercial both state that the body edges match the face color and material unless otherwise specified. Fixed shelves are body color, adjustable shelves edge are interior color.

"Edgebanding matched to exposed surfaces."

Download FREE NAAWS 3.1 2020

5/18/20       #15: Edgebanding: Match the doors or mat ...
DJS

Alan,

The interesting thing about that spec is the body color is less conspicuous than the shelf edge. Perhaps because above and below the shelf it is pitch black when viewed through the center reveal of a pair of doors, it tends to be more noticeable, especially when there's a heavy contrast between the doors and the edging. With darker doors Maple edgebanding looks like a white stripe and with white doors it looks like a brown stripe. Interestingly, white pvc edging is just as noticeable when viewed through the 1/8" reveal of a pair of doors as maple edging, but the customers seem to make some sort of compromise in their minds that it is ok, because none have every complained about seeing white PVC edges with their white cabinets. Go figure.

We offered our customers the option of reducing the shelf depth by 1/2" to push it back into the shadows and this option was almost universally rejected, so we no longer bring it up.

DJS

5/18/20       #16: Edgebanding: Match the doors or mat ...
Karl E Brogger  Member

Website: http://www.sogncabinets.com

I think the face of the box should match the face and edge of the door.

5/19/20       #17: Edgebanding: Match the doors or mat ...
Jim kolar

We use applied ends so our cases can be banded with Pvc banding. 1mm is our standard. Any open areas are matching to exterior doors and drawer fronts. No I don’t have a perfect matching with pvc wood grains but we come within a range. If stain color is dark we go black edge banding as an example. Pvc is labor saving and more durable in long haul then wood edging.

5/20/20       #18: Edgebanding: Match the doors or mat ...
Scott

As Alan said, the box itself is edged with the same colour as the doors, the shelves are edged with the same colour as the interior of the box.
The reason for this is the colour of the kitchen is to be all the same when you look at it. if you had white melamine boxes and black doors, you would see little white strips between your cabinet doors, especially on cabinets where people don’t know how to size and build doors to end up with 2.5 mm gaps max. Now days you have kitchens with cabinets of various colours so everything is more about design.
In reality you and the customer decide on how you build the cabinet and what colour it will be. If you all decide pink edging is the colour, then go for it. The cabinet will not fall off the wall because the edging matched the interior.

5/20/20       #19: Edgebanding: Match the doors or mat ...
Alan F. Member

Scott,
The cabinet won't fall off the wall but a designer friend might fall in shock and sue :=).

We did a job about 26 years ago and the architect specified a 7/8" half-round trim that was 12' off the floor. The molding company was out of 7/8" so we used 1".

It was rejected as too thick. I always imagined people coming in the store and stopping in their tracks when they saw the molding 12' up and 20' away and being too thick, the crowds of people falling to the floor in shock and turning to run out, the liability risk was huge.

A-

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello
    Today's Sponsors

    Become a Sponsor today!