|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
I have been using KCD for about three months now and I really like it but there is so much that I don't know how to do. Is there any other type of instruction on how to better operate the software? A video of start to finish in designing a kitchen would be really helpful.
Stan's response is #1.
Next is http://www.kcdsoftware.com/tech-support.html (the tab below)
Support is free - call them regardless how simple or small the issue.
If you are on LinkedIn, check out the KCD Software Users group.
Stan and riches response on the mark if you call them their very helpful , i've had the program for about 15 years probably got 75 or 80% out of it.one thing I found is if you use your imagination that helps a lot.they have some videos right on the program to help you get started
Like John, I learned on the tutorial that comes with it. But from time to time I find something new with it.
Thanks for the input. I have watched the videos and really like having the option to call tech support but I think there would be a lot to learn by watching a start to finish video for a midsized kitchen.
These are pretty old, but I think they are still relevant.