Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

how do you support a commercial bar

4/17/15       
the google

we're bidding a local restaurant bar top and they want to a 3"-4" thick bar top to use in a traditional bar application. It is going to go on top of a steel-studded, sheet-rocked knee wall. Figuring on a 14-18" overhang, what is the best method to support the top without interfering with knee space? i'm not a bar go-er so how are these traditionally supported?

4/17/15       #2: how do you support a commercial bar ...
Robert Member

Back in the day it was with my hard earned money and then when I ran out of cash I supported it with my credit cards.

A bit of light humor on this wonderful Friday the google. Njoy the weekend and save some work for Monday.;-)

4/17/15       #3: how do you support a commercial bar ...
matt calnen

I have done two commercial bars. Both times the main bar surface was granite with a traditional wood bar rail molding. They supported it with "L" shaped steel brackets fastened to the inside of the half wall. I have never seen metal studs used in the application and I would think that they would be a lot weaker than wood ones. Ask a reputable granite guy and he should be able to give you a source for the brackets.

4/18/15       #4: how do you support a commercial bar ...
Michael

would something like this work...

Concealed brackets

4/18/15       #5: how do you support a commercial bar ...
matt calnen

The ones our local granite guys use are roughly 1/2" thick and they are just flat iron in an "L" Shape. They are very rigid and have almost no flex. I have never used an angle iron type bracket but as long as it works with the design it looks good to me. For one bar I laid 3/4" plywood down on top of the half wall and left spaces for the brackets. I ran the plywood out so it would catch the bottom of the bar rail molding and I had some thing to fasten to. The granite guy then installed brackets and bar top, then I put the bar molding on and a layer of 1/4" on the bottom of the plywood to cover the brackets and finish it off nicely.

4/18/15       #6: how do you support a commercial bar ...
Kevin Member

I have used these, very well made. Only used them with wood framing though.

CenterlineBrackets

4/19/15       #7: how do you support a commercial bar ...
nicko

why do you need 14 to 18 inch over hang?
10 to 12 inches is plenty.
i think you can do 10 inches with granite with no support
nicko

4/19/15       #8: how do you support a commercial bar ...
nicko

sorry i see that it is not granite but still 10 dot twelve inches is plenty

nicko

4/19/15       #9: how do you support a commercial bar ...
Bill Richardson  Member

Website: http://www.awwtx.com

Sheetrock over steel studs won't work, not nearly enough structure to support that bar.

4/19/15       #10: how do you support a commercial bar ...
matt calnen

The amount of overhang needed on a bar varies on its use. 10 inches is not comfortable but workable. Both bars I did, they wanted to have the potential to serve food at, so we did a 14 inch over hang. They also had nice large bar stools so that amount of over hang was needed. Alot of considerations and variables go into the design.

4/19/15       #11: how do you support a commercial bar ...
Larry

Most of the bars we've done have been about 14" total overhang. Gyp on steel studs doesn't seem like a good idea!

2/6/17       #12: how do you support a commercial bar ...
Kevin W Burke

You can also try these


View larger image

Brackets

8/16/17       #13: how do you support a commercial bar ...
Renee Pierce

Website: https://www.thegranitebracketshop.com

The Easy Bracket is a self leveling countertop support bracket.

This Self Leveling Countertop Support Bracket is mounted to the fulcrum by drilling into the four mounting screw holes is the threshold between the rear and forward ends of the bracket. These holes mainly hold the bracket in place, but may also be used to implement minute leveling adjustments during installation.


View larger image

How to install commercial granite counte

8/16/17       #14: how do you support a commercial bar ...
Matt calnen

Looking at the bracket design, I don't think it would work in the OP's situation as there's no, to not much overhang to the working side of the bar. On a side note, are you telling me that you can sit on the edge of the countertop and those four screws are going to hold the top from tipping?


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello